Chance of showers
mepland·chance_of_showers·circuit_diagram/circuit_diagram.kicad_pcb
About the Chance of showers PCB
Chance of showers is an open source PCB design by mepland, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 56 mm, with 1 components from 1 distinct parts.
It belongs with the test & measurement designs in this gallery.
From the project
This project provides live water pressure measurements via a web dashboard running on a Raspberry Pi, logs the data, and creates time series forecasts of future water pressure.
This project provides live water pressure measurements via a web dashboard running on a Raspberry Pi, logs the data, and creates time series forecasts of future water pressure.
Below is a sample of the pressure data collected in November 2023. Clicking the links will open interactive plotly plots, please explore!
The data acquisition (DAQ) system saves the raw pressure data from the analog to digital converter (ADC) as an integer between 0 and 65472. Note that occasionally a water hammer will increase the pressure above its steady state value, marked by the orange 100% reference line, with…

Chance of showers bill of materials (BOM)
1 components, 1 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GPIO | PinSocket_2x20_P2.54mm_Vertical | J1 |
Chance of showers design files
The KiCad project lives in the mepland/chance_of_showers repository on GitHub; these links point at the commit this page was built from.
Chance of showers: common questions
How big is the Chance of showers PCB?
The Chance of showers measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Chance of showers?
1 components, from 1 distinct parts. The full bill of materials is listed on this page.
Where can I download the Chance of showers design files?
From the mepland/chance_of_showers repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Chance of showers design in my own project?
Yes, under the terms of its MIT license, which mepland chose for the repository.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528