Piezo thres
About the Piezo thres PCB
Piezo thres is an open source PCB design by MetaluNetProjects, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 45.7 × 45.7 mm, with 16 components from 14 distinct parts.
Other key parts include the LM358. By type, the board carries 5 resistors, 4 connectors, 3 capacitors, 1 IC, 1 transistor and 1 diode.
From the project
GroupeLAPS - GamesOfLight repository
- Fraise - moonlib - zexy - ggee - motex - iemlib
Main components on the Piezo thres
Piezo thres bill of materials (BOM)
16 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM358 | DIP-8_W7.62mm_Socket | U1 |
| 1 | BC547 | TO-92_Inline | Q1 |
| 1 | Piezo | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | Input | TerminalBlock_bornier-4_P5.08mm | J2 |
| 1 | Leds1 | TerminalBlock_bornier-4_P5.08mm | J3 |
| 1 | Leds2 | TerminalBlock_bornier-4_P5.08mm | J4 |
| 1 | 10k | Potentiometer_Piher_PT-10-V10_Vertical | RV1 |
| 1 | D | D_A-405_P7.62mm_Horizontal | D1 |
| 2 | 100n | C_Rect_L4.0mm_W2.5mm_P2.50mm | C1, C2 |
| 1 | 10n | C_Rect_L4.0mm_W2.5mm_P2.50mm | C3 |
| 2 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 1 | 100k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 1M | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4 |
| 1 | 120 / 5W | R_Axial_Power_L25.0mm_W9.0mm_P27.94mm | R5 |
Piezo thres design files
The KiCad project lives in the MetaluNetProjects/GamesOfLight repository on GitHub; these links point at the commit this page was built from.
Piezo thres: common questions
How big is the Piezo thres PCB?
The Piezo thres measures 45.7 × 45.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Piezo thres?
16 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Piezo thres design files?
From the MetaluNetProjects/GamesOfLight repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Piezo thres design in my own project?
Yes, under the terms of its GPL-3.0 license, which MetaluNetProjects chose for the repository.
