PicoFraise
About the PicoFraise PCB
PicoFraise is an open source RP2040/RP2350 PCB design by MetaluNetProjects, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 49.5 × 91.2 mm, with 21 components from 16 distinct parts.
Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the L7805. By type, the board carries 9 connectors, 3 capacitors, 2 ICs, 2 jumpers, 2 resistors and 1 diode.
From the project
GroupeLAPS - GamesOfLight repository
- Fraise - moonlib - zexy - ggee - motex - iemlib
Main components on the PicoFraise
PicoFraise bill of materials (BOM)
21 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pico | RPi_Pico_SMD_TH | U1 |
| 1 | L7805 | TO-220-3_Vertical | U2 |
| 5 | Conn_01x04_Socket | TerminalBlock_bornier-4_P5.08mm | J1, J2, J3, J4, J6 |
| 1 | Conn_01x03_Socket | TerminalBlock_bornier-3_P5.08mm | J5 |
| 1 | Reset | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | 12-24V input | TerminalBlock_bornier-2_P5.08mm | J8 |
| 1 | Conn_01x02_Socket | TerminalBlock_bornier-2_P5.08mm | J9 |
| 1 | Fraise_5x2 | IDC-Header_2x05_P2.54mm_Vertical | FR1 |
| 1 | link5V | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | link5V | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP2 |
| 1 | L7805 | TO-252-3_TabPin2 | Ubis2 |
| 1 | 1A | D_SMA | D1 |
| 1 | 100n | C_Rect_L4.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 22uF | CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.50mm | C3 |
| 2 | R_Network08 | R_Array_SIP9 | RN1, RN2 |
PicoFraise design files
The KiCad project lives in the MetaluNetProjects/GamesOfLight repository on GitHub; these links point at the commit this page was built from.
PicoFraise: common questions
What microcontroller does the PicoFraise use?
The PicoFraise is built around the Pico, from the RP2040/RP2350 family.
How big is the PicoFraise PCB?
The PicoFraise measures 49.5 × 91.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PicoFraise?
21 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the PicoFraise design files?
From the MetaluNetProjects/GamesOfLight repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PicoFraise design in my own project?
Yes, under the terms of its GPL-3.0 license, which MetaluNetProjects chose for the repository.
Can I test firmware for the PicoFraise without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in GamesOfLight
Similar boards
RP2040/RP2350Open Book Abridged Edition
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1k
RP2040/RP2350Corne
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350Corne
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0k
RP2040/RP2350Jitx design
55.5 × 65 mm26 parts4LGPL-3.05.0k
RP2040/RP2350Main
google
98 × 71 mm102 parts2LApache-2.02.9k