GCode Buttons B3K-T13L
About the GCode Buttons B3K-T13L PCB
GCode Buttons B3K-T13L is an open source PCB design by meteyou, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 20.6 × 23 mm, with 6 components from 5 distinct parts.
By type, the board carries 2 connectors, 2 resistors, 1 diode and 1 capacitor.
From the project
The Klipper Gcode-Buttons offer a unique control and status display solution in 3D printers and automated systems. Executing gcodes directly via hardware buttons and displaying the status visually significantly increases user-friendliness. The CANBUS support as a USB-to-CAN adapt
The Klipper Gcode-Buttons offer a unique control and status display solution in 3D printers and automated systems. Executing gcodes directly via hardware buttons and displaying the status visually significantly increases user-friendliness. The CANBUS support as a USB-to-CAN adapter and the additional interfaces, such as SPI and I2C, offer extra benefits and significantly expand the application possibilities.
GCode Buttons B3K-T13L bill of materials (BOM)
6 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CONN_01X08 Conn_01x08 | JUSHUO AFC11-S08ICC-00 | J1, J2 |
| 1 | SK6812MINI-E SK6812mini-e | SK6812MINI-E | D1 |
| 1 | 100N 100n | C_0402_1005Metric | C1 |
| 1 | 10K 10k | R_0402_1005Metric | R1 |
| 1 | 100R | R_0402_1005Metric | R2 |
GCode Buttons B3K-T13L design files
The KiCad project lives in the meteyou/klipper-gcode-buttons repository on GitHub; these links point at the commit this page was built from.
GCode Buttons B3K-T13L: common questions
How big is the GCode Buttons B3K-T13L PCB?
The GCode Buttons B3K-T13L measures 20.6 × 23 mm, has 4 copper layers and is 1.59 mm thick.
How many components are on the GCode Buttons B3K-T13L?
6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GCode Buttons B3K-T13L design files?
From the meteyou/klipper-gcode-buttons repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GCode Buttons B3K-T13L design in my own project?
Yes, under the terms of its GPL-3.0 license, which meteyou chose for the repository.
