Contact microphone preamp
Miceuz·contact-microphone-preamp
About the Contact microphone preamp PCB
Contact microphone preamp is an open source PCB design by Miceuz, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 43 × 43 mm, with 20 components from 15 distinct parts.
Other key parts include the LM358. By type, the board carries 6 resistors, 5 capacitors, 4 connectors, 1 IC, 1 battery holder and 1 switch.
From the project
A preamplifier for contact microphone

Main components on the Contact microphone preamp
Contact microphone preamp bill of materials (BOM)
20 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM358 | SO-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Batt | Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | Piezo | Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | Out | Pin_Header_Straight_1x02_Pitch2.54mm | J3 |
| 1 | SJ-3523-SMT-TR | CUI_SJ-3523-SMT-TR | J4 |
| 1 | Battery | A23_BATT | BT1 |
| 1 | 360k | Trimpot_3.8mmx3.6mm_TC33X-2-103E | RV1 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | LED | LED_0603_SLP3-150-150-F | D1 |
| 2 | 47u | CP_Elec_6.3x7.7 | C1, C5 |
| 2 | 1u | C_0603_1608Metric | C2, C3 |
| 1 | C | C_0603_1608Metric | C4 |
| 4 | 400k | R_0603_1608Metric | R1, R2, R3, R5 |
| 1 | 40k | R_0603_1608Metric | R4 |
| 1 | 1k | R_0603_1608Metric | R6 |
Contact microphone preamp design files
The KiCad project lives in the Miceuz/contact-microphone-preamp repository on GitHub; these links point at the commit this page was built from.
- Layoutcontact-mic.kicad_pcb
Contact microphone preamp: common questions
How big is the Contact microphone preamp PCB?
The Contact microphone preamp measures 43 × 43 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Contact microphone preamp?
20 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Contact microphone preamp design files?
From the Miceuz/contact-microphone-preamp repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Contact microphone preamp design in my own project?
Yes, under the terms of its Apache-2.0 license, which Miceuz chose for the repository.