PlacaAdaptadora
About the PlacaAdaptadora PCB
PlacaAdaptadora is an open source PCB design by migueledvc, published on GitHub. It is a 2-layer board measuring 193 × 100 mm, with 96 components from 15 distinct parts.
Other key parts include the LM361MX_NOPB, TLV2772IDR and SN74LVC2T45DCUR. By type, the board carries 30 capacitors, 20 connectors, 10 ICs, 10 jumpers, 10 resistors and 6 diodes.
From the project
Placa adaptadora de señales
Placa adaptadora de señales de radar ====================================
+ El presente documento presenta la idea de un circuito adaptador de señales típicas de un radar.
+ No se especifica un modelo de radar en particular.
+ El circuíto es parte del desarrollo de un procesador de radar con tecnología FPGA-SoC. (ADC-SoC de Terasic)
+ Se utiliza para esta placa licencia "BSD 3-clause"
Main components on the PlacaAdaptadora
PlacaAdaptadora bill of materials (BOM)
96 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | LM361MX_NOPB | DIP-14_W7.62mm_Socket | U11, U12, U13, U14 |
| 4 | TLV2772IDR | SOIC-8_3.9x4.9mm_P1.27mm | U21, U22, U23, U25 |
| 2 | SN74LVC2T45DCUR | VSSOP-8_2.4x2.1mm_P0.5mm | U31, U32 |
| 16 | Conn_Coaxial | SMA_Amphenol_901-144_Vertical | J1, J2, J3, J4, J10, J11, J12, J13 +8 |
| 1 | Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Horizontal | J5 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J6, J9 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 10 | Jumper_3_Open | PinHeader_1x03_P2.54mm_Vertical | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 +2 |
| 10 | R_POT | Potentiometer_Bourns_3296W_Vertical | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8 +2 |
| 6 | D_TVS | D_DO-15_P10.16mm_Horizontal | D1, D2, D3, D4, D5, D6 |
| 23 | 0_1uF-50V | C_0805_2012Metric | C1, C2, C4, C5, C10, C11, C12, C13 +15 |
| 3 | 2_2uF-35V | CP_EIA-6032-28_Kemet-C | C3, C6, C7 |
| 4 | 1uF-16V | R_1206_3216Metric | C8, C9, C20, C21 |
| 6 | 50 - 1/2W - 5% | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R1, R2, R3, R4, R7, R8 |
| 4 | 100 - 1/8W - 5% | R_0805_2012Metric | R5, R6, R9, R10 |
PlacaAdaptadora design files
The KiCad project lives in the migueledvc/placaAdaptadora repository on GitHub; these links point at the commit this page was built from.
PlacaAdaptadora: common questions
How big is the PlacaAdaptadora PCB?
The PlacaAdaptadora measures 193 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PlacaAdaptadora?
96 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PlacaAdaptadora design files?
From the migueledvc/placaAdaptadora repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the PlacaAdaptadora design in my own project?
The repository has no license, so all rights stay with migueledvc. Use it as a reference, and ask the author before reusing the design.