32 open source boards using the SN74LVC2T45DCUR

Real designs built with the SN74LVC2T45DCUR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

32 boardsClear filters|Most starred

How designs wire the SN74LVC2T45DCUR

Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the SN74LVC2T45DCUR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCB pin has a decoupling capacitor on 14 of 20 designs, most often 100 nF (then 1 µF).
  • The VCCA pin has a decoupling capacitor on 13 of 20 designs, most often 100 nF (then 4.7 µF).
VCCApin 1Connected to: 3.3V 80% · a signal 15%
  • Decoupling capacitor on 65% · 100 nF (21), 4.7 µF (2), 1 µF (1)
GNDpin 4Connected to: GND 91%
B2pin 6Connected to: The microcontroller 25%
  • Series resistor on 35% · 100 Ω (4), 33 Ω (1), 39 Ω (1)
VCCBpin 8Connected to: 3.3V 60% · a signal 35%
  • Decoupling capacitor on 70% · 100 nF (25), 1 µF (2), 4.7 µF (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ovc2 stereo by osrf, AquaMQTT by tspopp, Bob by orbcode and Black magic debugger by atopile.

The SN74LVC2T45DCUR in open source designs

The gallery holds 32 open source boards using the SN74LVC2T45DCUR from 21 GitHub repositories; a typical one measures about 90 × 77 mm and carries around 104 components.

55% use four copper layers or more, and 69% carry an open source license.

The most starred is Ovc2 stereo by osrf.

Microcontrollers on boards using the SN74LVC2T45DCUR

SN74LVC2T45DCUR: common questions

Where can I find a SN74LVC2T45DCUR reference design?

Each of the 32 boards on this page is a real design using the SN74LVC2T45DCUR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74LVC2T45DCUR VCCB pin?

The VCCB pin has a decoupling capacitor on 14 of 20 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 20 open source designs using the SN74LVC2T45DCUR.

What decoupling capacitors do designs use on the SN74LVC2T45DCUR VCCA pin?

The VCCA pin has a decoupling capacitor on 13 of 20 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 20 open source designs using the SN74LVC2T45DCUR.

What parts are used alongside the SN74LVC2T45DCUR?

The USBLC6-2SC6, AO3400A, AP40P05, MSM261D4030H1CPM and SN74LVC1G373DBVR appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC2T45DCUR use?

Most are built on RP2040/RP2350 (11), ESP32 (7), STM32 (4) and FPGA (1).

How big is a typical board using the SN74LVC2T45DCUR?

The median is 90 × 77 mm, and 45% are two-layer designs.

What is the most popular open source board using the SN74LVC2T45DCUR?

By GitHub stars, Ovc2 stereo by osrf, with 207 stars.

Can I simulate one of these boards using the SN74LVC2T45DCUR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part