Led blinker

mihai-m0·led_blinker_kicad

Led blinker PCB layout, top view — open source board by mihai-m0

About the Led blinker PCB

Led blinker is an open source PCB design by mihai-m0, published on GitHub. It is a 2-layer board measuring 50 × 45.5 mm, with 9 components from 9 distinct parts.

Other key parts include the NE555P. By type, the board carries 3 capacitors, 3 resistors, 1 IC, 1 connector and 1 diode.

From the project

A simple astable 555 timer circuit that blinks an LED at about 1 Hz, designed in KiCad.

Led blinker, from the project README
From the project README

Main components on the Led blinker

Led blinker bill of materials (BOM)

9 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NE555P
U1
1
Conn_01x02
J1
1
LED
D1
1
10u
C1
1
10NF
10n
C2
1
100NF
100n
C3
1
10K
10k
R1
1
68K
68k
R2
1
470
R3

Led blinker design files

The KiCad project lives in the mihai-m0/led_blinker_kicad repository on GitHub; these links point at the commit this page was built from.

Led blinker: common questions

How big is the Led blinker PCB?

The Led blinker measures 50 × 45.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Led blinker?

9 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Led blinker design files?

From the mihai-m0/led_blinker_kicad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Led blinker design in my own project?

The repository has no license, so all rights stay with mihai-m0. Use it as a reference, and ask the author before reusing the design.