Arduino-Nano-RP2040-Drone-V1

MJoule·Arduino-Nano-RP2040-Drone-V1

This repository ships a schematic but no board layout.

About the Arduino-Nano-RP2040-Drone-V1 PCB

Arduino-Nano-RP2040-Drone-V1 is an open source PCB design by MJoule, published on GitHub. It is a board, with 79 components from 38 distinct parts.

By type, the board carries 22 connectors, 20 capacitors, 16 resistors, 14 diodes, 4 transistors and 1 fuse.

It belongs with the robotics & motion designs in this gallery.

From the project

Arduino-Nano-RP2040-Drone-V1

79 components, 38 distinct parts.

Qty	Part	Footprint	Refs
4	IRLML0030	SOT-23	Q1, Q2, Q3, Q4
1	PWM1	PinHeader_1x01_P2.54mm_Vertical	J1
1	M1+	SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm	J2
1	M1-	SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm	J3
1	PWM2	PinHeader_1x01_P2.54mm_Vertical	J4
1	M2+	SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm	J5
1	M2-	SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm	J6
1	Nano+	PinHeader_1x01_P2.54mm_Vertical	J7
1	Nano-	PinHeader_1x01_P2.54mm_Vertical	J8
1	EP+	SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm	J9
1	EP-	SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm	J10
1	VTX+	SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm	J11
1	VTX-	SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm	J12
1	PWM3	PinHeader_1x01_P2.54mm_Vertical	J13
1	M3+	SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm	J14
1	M3-	SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm	J15
1	PWM4	PinHeader_1x01_P2.54mm_Vertical	J16
1	M4+	SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm	J17
1	M4-	SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm	J18
1	EP2 TX	PinHeader_1x01_P2.54mm_Vertical	J19

Show 18 more

Qty	Part	Footprint	Refs
1	EP2 RX	PinHeader_1x01_P2.54mm_Vertical	J20
1	EP2 RX	SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm	J21
1	EP2 TX	SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm	J22
1	Conn_01x02_Socket	JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical	BAT1
1	Polyfuse	Fuse_2920_7451Metric	F1
6	PESD3V3L1BA	D_SOD-323_HandSoldering	D1, D2, D5, D6, D9, D12
8	PMEG3010CEJ	D_SOD-323_HandSoldering	D3, D4, D7, D8, D10, D11, D13, D14
1	600Ohm @ 100MHz	L_0805_2012Metric_Pad1.05x1.20mm_HandSolder	FB1
2	220 uF	C_Elec_6.3x7.7	C2, C9
2	1 uF	C_0805_2012Metric_Pad1.18x1.45mm_HandSolder	C3, C21
4	100 nF	C_0805_2012Metric_Pad1.18x1.45mm_HandSolder	C4, C5, C14, C15
3	10 uF	C_0805_2012Metric_Pad1.18x1.45mm_HandSolder	C6, C10, C11
8	33nF	C_0805_2012Metric_Pad1.18x1.45mm_HandSolder	C7, C8, C13, C16, C17, C18, C19, C20
1	0.1 uF	C_0805_2012Metric_Pad1.18x1.45mm_HandSolder	C12
4	4.7	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R1, R5, R9, R13
4	470k	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R2, R6, R10, R14
4	22	R_1206_3216Metric_Pad1.30x1.75mm_HandSolder	R3, R7, R11, R15
4	100k	R_0805_2012Metric_Pad1.20x1.40mm_HandSolder	R4, R8, R12, R16

The KiCad project lives in the MJoule/Arduino-Nano-RP2040-Drone-V1 repository on GitHub; these links point at the commit this page was built from.

79 components, from 38 distinct parts. The full bill of materials is listed on this page.

From the MJoule/Arduino-Nano-RP2040-Drone-V1 repository on GitHub, which has the schematic; the links under Design files point to each one.

The repository has no license, so all rights stay with MJoule. Use it as a reference, and ask the author before reusing the design.