LED-Blinker-Circuit-555
mongarejoshua·LED-Blinker-Circuit-555
About the LED-Blinker-Circuit-555 PCB
LED-Blinker-Circuit-555 is an open source PCB design by mongarejoshua, published on GitHub. It is a 2-layer board measuring 18.4 × 18.5 mm, with 8 components from 8 distinct parts.
Other key parts include the NE555D. By type, the board carries 3 resistors, 2 capacitors, 1 IC, 1 connector and 1 diode.
From the project
This repository contains a simple LED flasher circuit designed around a 555 timer. The project was created in KiCad and includes the complete schematic, PCB layout, project settings, exported artwork, and backup archives. It is intended as a small electronics design example for l
This repository contains a simple LED flasher circuit designed around a 555 timer. The project was created in KiCad and includes the complete schematic, PCB layout, project settings, exported artwork, and backup archives. It is intended as a small electronics design example for learning, prototyping, and board fabrication.
The circuit uses an NE555D timer IC in an astable configuration to generate a periodic output that toggles an LED on and off. A 9V power source is connected through a 2-pin connector, and the output drives a visible LED through a current-limiting resistor.
Main components on the LED-Blinker-Circuit-555
LED-Blinker-Circuit-555 bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555D | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Conn_01x02_Pin | PinSocket_1x01_P2.54mm_Horizontal | J1 |
| 1 | LED | LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm_Clear | D1 |
| 1 | 10u | CP_Axial_L10.0mm_D6.0mm_P15.00mm_Horizontal | C1 |
| 1 | 10n | CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C2 |
| 1 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1 |
| 1 | 68k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 470 | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R3 |
LED-Blinker-Circuit-555 design files
The KiCad project lives in the mongarejoshua/LED-Blinker-Circuit-555 repository on GitHub; these links point at the commit this page was built from.
- LayoutLED Blinker Circuit.kicad_pcb
- SchematicLED Blinker Circuit.kicad_sch
LED-Blinker-Circuit-555: common questions
How big is the LED-Blinker-Circuit-555 PCB?
The LED-Blinker-Circuit-555 measures 18.4 × 18.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LED-Blinker-Circuit-555?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the LED-Blinker-Circuit-555 design files?
From the mongarejoshua/LED-Blinker-Circuit-555 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LED-Blinker-Circuit-555 design in my own project?
The repository has no license, so all rights stay with mongarejoshua. Use it as a reference, and ask the author before reusing the design.