86 open source boards using the NE555D
Real designs built with the NE555D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Interface board 1
Green-bms
107 × 54 mm63 parts2LCC-BY-SA-4.0752FlippyDriver
NietoSkunk
189.4 × 59.1 mm310 parts4LMIT10Unipolar stepper driver
soghayarmahmoud
88.2 × 73.8 mm22 parts2LCERN-OHL-S-2.04UniBadge-9x9
marove2000
50 × 50 mm108 parts2LCC-BY-SA-4.03Ruler V2
ben5049
155 × 30 mm17 parts2LApache-2.03FrontPanel
89Mods
258.1 × 122.9 mm118 parts2LMIT2Padapter
hkzlab
42.7 × 31 mm42 parts2LCC-BY-NC-4.02Supercar larson scanner
hkzlab
63.5 × 43.6 mm41 parts2LCC-BY-NC-4.02PAM-Using-555-Timer
ExTc-aShiSh
37 × 22.5 mm21 parts2LMIT2Huhhhh I didnt save
ethanjamesauto
229.9 × 93.3 mm365 parts2LNo license1LV Board Mk2
Lafayette-Motorsports
263 × 139.8 mm178 parts4LNo license1ESP32
LV PCB
luftaquila
293.1 × 125.3 mm159 parts2LNo license1DigitalTimer
Bican-Valeriu-Cristian
82 × 84 mm35 parts2LMIT1Binary Counter 8Bit
himanshu40304
70 × 45 mm31 parts2LNo license1Oft
0x007E
26.7 × 25.4 mm27 parts2LCC-BY-NC-4.01Energy saving device for solenoid valves
Solderingironspb
33.7 × 32.1 mm23 parts2LNo license1Voltage Doubler
ibrahimjarallah
36 × 23 mm11 parts2LNo license1NE555-Astable-Multivibrator-KiCad
shehan6000
44.3 × 38.8 mm8 parts2LNo license1Flashing led
ItsKarlito
22.9 × 12.2 mm7 parts2LMIT1IbScaleSeqRails
ibScale
203 × 64 mm287 parts4LCERN-OHL-S-2.00Glr bspd
green-lion-racing
60 × 90 mm123 parts2LMIT0STM32
PUTM DV EBS 2022
PUT-Motorsport
97.9 × 67.4 mm121 parts2LNo license0OldStyleDigitalClock
decadenza
155 × 85 mm85 parts2LCC-BY-SA-4.00Precharge Circuit Final
MADHURAMAN-afk
145 × 65 mm72 parts2LNo license0Https github.com bejaouihamza-IR-Interruption-Detector
bejaouihamza
106.1 × 110.1 mm71 parts2LNo license0Laser
wryan67
74.9 × 31.8 mm64 parts2LMIT0AVR/Arduino
Interface board 1
chipsi
107 × 54 mm63 parts2LCC-BY-SA-4.00AVR/Arduino
Interface board 1
wzc1992
107 × 54 mm63 parts2LCC-BY-SA-4.00AVR/Arduino
Interface board 1
CHIBOY12
107 × 54 mm63 parts2LNo license0Neutec repeater hardware
phastmike
95 × 75 mm54 parts2LNo license0Mains monitor device
mains-monitor
52.2 × 30.8 mm41 parts4LMIT0BinaryCounter
Wjchou2
63.5 × 71.3 mm35 parts2LNo license0DigitalTimer
CurcanRazvan
82 × 84 mm34 parts2LNo license0Water saturation
laoeked1111
52.5 × 24.8 mm28 parts2LNo license0STM32
STM32
ravilpatel
41 × 28.8 mm28 parts2LNo license0Gallery target
prydin
50.8 × 33 mm28 parts2LMIT0
How designs wire the NE555D
Read from the KiCad layouts of 69 open source designs, one per repository: what each pin of the NE555D connects to, and the resistors, capacitors and other passives placed on it.
- The THR pin has a capacitor to GND on 52 of 68 designs, most often 10 µF (then 10 nF).
- The CV pin has a capacitor to GND on 50 of 68 designs, most often 10 nF (then 100 nF).
- The TR pin has a capacitor to GND on 44 of 69 designs, most often 10 nF (then 10 µF).
- The THR pin has a series resistor on 44 of 68 designs, most often 10 kΩ (then 10 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 93% | — |
| TRpin 2 | Connected to: Signal 94% |
|
| Qpin 3 | Connected to: Signal 97% |
|
| CVpin 5 | Connected to: Signal 79% · not connected 21% |
|
| THRpin 6 | Connected to: Signal 93% |
|
| DISpin 7 | Connected to: Signal 85% |
|
| VCCpin 8 | Connected to: 5V 78% · a signal 22% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Interface board 1 by Green-bms, Leaky bucket by tpcarlson, Genesis to c64 by evietron and 8-bit computer Keypad Module by xrayer2000.
The NE555D in open source designs
The gallery holds 86 open source boards using the NE555D from 69 GitHub repositories; a typical one measures about 68.6 × 54 mm and carries around 34 components.
92% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is Interface board 1 by Green-bms.
Parts used alongside the NE555D
Microcontrollers on boards using the NE555D
What boards using the NE555D are built for
NE555D: common questions
Where can I find a NE555D reference design?
Each of the 86 boards on this page is a real design using the NE555D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the NE555D THR pin connected?
The THR pin has a capacitor to GND on 52 of 68 designs, most often 10 µF (then 10 nF). Counted from the KiCad layouts of 69 open source designs using the NE555D.
How is the NE555D CV pin connected?
The CV pin has a capacitor to GND on 50 of 68 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 69 open source designs using the NE555D.
How is the NE555D TR pin connected?
The TR pin has a capacitor to GND on 44 of 69 designs, most often 10 nF (then 10 µF). Counted from the KiCad layouts of 69 open source designs using the NE555D.
What parts are used alongside the NE555D?
The 4N35, ULN2003A, 4017, L7805 and LM311 appear in the most repositories here.
Which microcontrollers do boards using the NE555D use?
Most are built on AVR/Arduino (5), STM32 (3) and ESP32 (2).
How big is a typical board using the NE555D?
The median is 68.6 × 54 mm, and 92% are two-layer designs.
What is the most popular open source board using the NE555D?
By GitHub stars, Interface board 1 by Green-bms, with 752 stars.
Can I simulate one of these boards using the NE555D before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.