HardLabs

YIPPEE Software

mpkarpov-ui·YIPPEE_Software·hardware/yippeeboard.kicad_pcb

YIPPEE Software PCB layout, top view — open source NXP board by mpkarpov-ui

About the YIPPEE Software PCB

YIPPEE Software is an open source NXP PCB design by mpkarpov-ui, published on GitHub. It is a 2-layer board measuring 21.2 × 82.8 mm, with 22 components from 16 distinct parts.

Its main chip is the Teensy4.0, from the NXP family. Other key parts include the SAM-M10Q, MPL3115A2, SST26VF040A-104I/SN and HM-TRLR-S-433. By type, the board carries 8 resistors, 5 ICs, 3 diodes, 3 capacitors, 2 connectors and 1 buzzer.

It belongs with the rf & radio designs in this gallery.

From the project

self explanatory

Your Integrated Presicion Positioning (and) Elevation Engine

YIPPEE is a personal project that I started in early 2025, and was my entry into hardware design, as I was interested in learning more about how my college rocketry team developed the hardware for its flight computers.

After receiving help from our Electronic Hardware lead, I had a schematic and layout I was happy with and produced it in our school's electronic lab. The software for this project was in majority written by me with some key contributions from Surag Nuthulapaty, who is a very smart and cool guy.

Main components on the YIPPEE Software

SAM-M10QTeensy4.0MPL3115A2SST26VF040A-104I/SNHM-TRLR-S-433

YIPPEE Software bill of materials (BOM)

22 components, 16 distinct parts.

QtyPartRefs
1
SAM-M10Q
U1
1
Teensy4.0
U2
1
MPL3115A2
U3
1
SST26VF040A-104I/SN
U4
1
HM-TRLR-S-433
U5
1
Conn_01x02
J1
1
Conn_Coaxial
J2
1
WST-1210
BZ1
1
LED_B
D1
1
LED_G
D2
1
LSM115JE3/TR13
D4
2
100 nF
C1, C3
1
10 μF
C2
2
4.7kΩ
R1, R2
4
22Ω
R3, R4, R5, R6
2
470
R7, R8

YIPPEE Software design files

The KiCad project lives in the mpkarpov-ui/YIPPEE_Software repository on GitHub; these links point at the commit this page was built from.

YIPPEE Software: common questions

What microcontroller does the YIPPEE Software use?

The YIPPEE Software is built around the Teensy4.0, from the NXP family.

How big is the YIPPEE Software PCB?

The YIPPEE Software measures 21.2 × 82.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the YIPPEE Software?

22 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the YIPPEE Software design files?

From the mpkarpov-ui/YIPPEE_Software repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the YIPPEE Software design in my own project?

The repository has no license, so all rights stay with mpkarpov-ui. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the YIPPEE Software without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

Similar boards