Outpost kits
mpkendall·outpost-thingies·hardware/outpost-kits.kicad_pcb
About the Outpost kits PCB
Outpost kits is an open source PCB design by mpkendall, published on GitHub. It is a 2-layer board measuring 58.1 × 55.4 mm, with 24 components from 19 distinct parts.
Other key parts include the NE555N, CD4026, SM420561N and LM3915N. By type, the board carries 7 resistors, 5 battery holders, 4 ICs, 1 transistor, 1 connector and 1 buzzer.
Main components on the Outpost kits
Outpost kits bill of materials (BOM)
24 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555N | DIP-8_W7.62mm | U1 |
| 1 | CD4026 | DIP-16_W7.62mm | U2 |
| 1 | SM420561N | 7SegmentLED_LTS6760_LTS6780 | U3 |
| 1 | LM3915N | DIP-18_W7.62mm | U4 |
| 1 | 2N3904 | TO-92_Inline | Q1 |
| 1 | PROBE | PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | HDSP-4830_2 | HDSP-48xx | BAR1 |
| 5 | CR2032 | BatteryHolder_Keystone_103_1x20mm | BT1, BT2, BT3, BT4, BT5 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | 10kR | Potentiometer_ACP_CA9-H5_Horizontal | RV1 |
| 1 | ROLL | SW_PUSH_6mm | SW1 |
| 1 | LED | LED_D5.0mm_FlatTop | D1 |
| 1 | 1uF | CP_Radial_D5.0mm_P2.00mm | C1 |
| 2 | 1kR | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R4 |
| 1 | 10kR | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 200kR | R_LDR_5.1x4.3mm_P3.4mm_Vertical | R3 |
| 1 | 2.2kR | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5 |
| 1 | 100kR | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R6 |
| 1 | 10MR | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R7 |
Outpost kits design files
The KiCad project lives in the mpkendall/outpost-thingies repository on GitHub; these links point at the commit this page was built from.
Outpost kits: common questions
How big is the Outpost kits PCB?
The Outpost kits measures 58.1 × 55.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Outpost kits?
24 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Outpost kits design files?
From the mpkendall/outpost-thingies repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Outpost kits design in my own project?
The repository has no license, so all rights stay with mpkendall. Use it as a reference, and ask the author before reusing the design.