10 open source boards using the SM420561N
Real designs built with the SM420561N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
DMH VCO 40106
DeMarco
98 × 135 mm147 parts2LNo license5FrontPanel
89Mods
258.1 × 122.9 mm118 parts2LMIT2Outpost kits
mpkendall
58.1 × 55.4 mm24 parts2LNo license224-Second Counter
shannadale
77.5 × 70.5 mm28 parts2LMIT024-Second Counter
gg-orozco
82.5 × 70 mm28 parts2LMIT024-Second Counter
teya1018
76 × 64 mm28 parts2LMIT0AVR/Arduino
M128 clock
eshazen
95.8 × 81.3 mm26 parts2LNo license0MinimalZ80
89Mods
132.6 × 60.5 mm34 parts2LMIT3Rng
mpkendall
57.1 × 50 mm8 parts2LNo license2STM32
EP5 rearbox
NTURacingTeam
149 × 79.5 mm229 parts2LNo license4
How designs wire the SM420561N
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the SM420561N connects to, and the resistors, capacitors and other passives placed on it.
- The E pin has a series resistor on 5 of 9 designs, most often 100 Ω (then 1 kΩ).
- The D pin has a series resistor on 5 of 9 designs, most often 100 Ω (then 1 kΩ).
- The CC pins is tied to GND on 67% of them (a signal on 6).
- The C pin has a series resistor on 5 of 9 designs, most often 100 Ω (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Epin 1 | Connected to: A connector 22%, SM420561N 22% |
|
| Dpin 2 | Connected to: A connector 22%, SM420561N 22% |
|
| CCpin 3, 8 | Connected to: GND 67% · a signal 33% | — |
| Cpin 4 | Connected to: A connector 22%, SM420561N 22% |
|
| Bpin 6 | Connected to: A connector 22%, SM420561N 22% |
|
| Apin 7 | Connected to: A connector 22%, SM420561N 22% |
|
| Fpin 9 | Connected to: A connector 22%, SM420561N 22% |
|
| Gpin 10 | Connected to: A connector 22%, SM420561N 22% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DMH VCO 40106 PCB by DeMarco, EP5 rearbox by NTURacingTeam, MinimalZ80 by 89Mods and FrontPanel by 89Mods.
The SM420561N in open source designs
The gallery holds 10 open source boards using the SM420561N from 9 GitHub repositories; a typical one measures about 89.1 × 70.3 mm and carries around 28 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is DMH VCO 40106 PCB by DeMarco.
Microcontrollers on boards using the SM420561N
What boards using the SM420561N are built for
SM420561N: common questions
Where can I find a SM420561N reference design?
Each of the 10 boards on this page is a real design using the SM420561N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the SM420561N E pin?
The E pin has a series resistor on 5 of 9 designs, most often 100 Ω (then 1 kΩ). Counted from the KiCad layouts of 9 open source designs using the SM420561N.
What resistor goes on the SM420561N D pin?
The D pin has a series resistor on 5 of 9 designs, most often 100 Ω (then 1 kΩ). Counted from the KiCad layouts of 9 open source designs using the SM420561N.
How is the SM420561N CC pin connected?
The CC pins is tied to GND on 67% of them (a signal on 6). Counted from the KiCad layouts of 9 open source designs using the SM420561N.
Which microcontrollers do boards using the SM420561N use?
Most are built on AVR/Arduino (2) and STM32 (1).
How big is a typical board using the SM420561N?
The median is 89.1 × 70.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the SM420561N?
By GitHub stars, DMH VCO 40106 PCB by DeMarco, with 5 stars.
Can I simulate one of these boards using the SM420561N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.