Midi controller control board teensy
About the Midi controller control board teensy
Midi controller control board teensy is an open source NXP PCB design by mppowell, published on GitHub. It is a 2-layer board measuring 66 × 135 mm, with 17 components from 13 distinct parts.
Its main chip is the TEENSY_4.1_THT, from the NXP family. Other key parts include the TMUX1209_TSSOP. By type, the board carries 5 resistors, 4 capacitors, 2 connectors, 1 IC, 1 module and 1 switch.
It belongs with the audio designs in this gallery.
Main components on the Midi controller control board teensy
Midi controller control board teensy bill of materials (BOM)
17 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TMUX1209_TSSOP AP63203WU | TSOT-23-6 | U1 |
| 1 | TEENSY_4.1_THT Teensy_4.1_THT | Teensy_4.1_THT | A1 |
| 1 | CONN_01X15_SOCKET Conn_01x40_Socket | Hirose_FH12-40S-0.5SH_1x40-1MP_P0.50mm_Horizontal | J1 |
| 1 | CONN_01X15_SOCKET Barrel_Jack_Switch | BarrelJack_Horizontal | J2 |
| 1 | ADAFRUIT_2IN_IPS_MODULE | ADAFRUIT_2IN_IPS_MODULE | DS1 |
| 1 | EN16AB-HB | EN16AB-HB | SW1 |
| 1 | RED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | 4.7uH, 2.7A, 100mOhm | L_Taiyo-Yuden_NR-60xx_HandSoldering | L1 |
| 1 | 10uF, 50V, 20% | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1 |
| 1 | 0.1uF, 25V, 5% | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 2 | 22uF, 6.3V, 20% | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 4 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
Midi controller control board teensy design files
The KiCad project lives in the mppowell/midi-controller repository on GitHub; these links point at the commit this page was built from.
Midi controller control board teensy: common questions
What microcontroller does the Midi controller control board teensy use?
The Midi controller control board teensy is built around the TEENSY_4.1_THT, from the NXP family.
How big is the Midi controller control board teensy?
The Midi controller control board teensy measures 66 × 135 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Midi controller control board teensy?
17 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Midi controller control board teensy design files?
From the mppowell/midi-controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Midi controller control board teensy design in my own project?
The repository has no license, so all rights stay with mppowell. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Midi controller control board teensy without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in midi-controller
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL64
MicroCoreLabs
39.3 × 61.8 mm9 parts4LNo license532
NXPROM Emulator
21.5 × 37.1 mm5 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532
NXPXTMAX
81 × 46 mm14 parts4LNo license532