HardLabs

Gx140-fpv build

MrBeeboh·gx140-fpv-build·builds/gx140/gx140_rev2.kicad_sch

This repository ships a schematic but no board layout.

About the Gx140-fpv build PCB

Gx140-fpv build is an open source PCB design by MrBeeboh, published on GitHub. It is a board, with 14 components from 14 distinct parts.

By type, the board carries 4 modules and 3 antennas.

It belongs with the rf & radio designs in this gallery.

From the project

When you need to generate code later: - MSP Bridge (Python): wiring/wiringdiagrams.md → UART tables - YOLO RKNN Quantize: sbc/sbcdeploymentchecklist.md → model perf table - GStreamer Pipeline: sbc/sbcdeploymentchecklist.md → VIM4 HDMI section - OpenSCAD Mounts: cad/mounts.scad →

When you need to generate code later: - MSP Bridge (Python): wiring/wiringdiagrams.md → UART tables - YOLO RKNN Quantize: sbc/sbcdeploymentchecklist.md → model perf table - GStreamer Pipeline: sbc/sbcdeploymentchecklist.md → VIM4 HDMI section - OpenSCAD Mounts: cad/mounts.scad → render STLs - KiCad Schematic: wiring/wiringdiagrams.md → netlist section - Assembly: assembly/assemblysheets.md` → step-by-step

Gx140-fpv build bill of materials (BOM)

14 components, 14 distinct parts.

QtyPartRefs
1
Specter_1804_FL_CCW
M1
1
Specter_1804_FR_CW
M2
1
Specter_1804_RL_CCW
M3
1
Specter_1804_RR_CW
M4
1
SMA_Foxeer_Lollipop_RHCP
AE1
1
ANT1_vert_L_standoff
AE2
1
ANT2_horiz_top_plate
AE3
1
2S_550mAh_LiHV_XT30
BAT1
1
Caddx_Ant_1200TVL
CAM1
1
BLS_35A_4in1_20x20_DShot600
ESC1
1
SpeedyBee_F405_Mini_20x20
FC1
1
Matek_M10Q-5883_(opt)
GPS1
1
BETAFPV_SuperD_ELRS_Diversity
RX1
1
HGLRC_Zeus_350mW_SmartAudio
VTX1

Gx140-fpv build design files

The KiCad project lives in the MrBeeboh/gx140-fpv-build repository on GitHub; these links point at the commit this page was built from.

Gx140-fpv build: common questions

How many components are on the Gx140-fpv build?

14 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the Gx140-fpv build design files?

From the MrBeeboh/gx140-fpv-build repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the Gx140-fpv build design in my own project?

The repository has no license, so all rights stay with MrBeeboh. Use it as a reference, and ask the author before reusing the design.

Similar boards