Radioberry preamp
pa3gsb·Radioberry-2.x·hardware/preamp/radioberry-preamp.kicad_pcb
About the Radioberry preamp PCB
Radioberry preamp is an open source PCB design by pa3gsb, published on GitHub. It is a 2-layer board measuring 65 × 56 mm, with 137 components from 59 distinct parts.
Other key parts include the LD1117S33, ST1S10, LP2985, MAX11613 and MCP4662. By type, the board carries 57 capacitors, 37 resistors, 10 connectors, 6 ICs, 6 transistors and 4 inductors.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
From the project
Ham Radio hat for Raspberry PI
RadioBerry V2.0 - Ham radio cape for Raspberry PI ==============================================
- Building a HAM Radio - Learning (from noob to guru)
WIKI FOR MORE DETAILS: https://github.com/pa3gsb/Radioberry-2.x/wiki
- Raspberry PI - Radio extension board (cape) - using AD9866 (12 bit) for RX and TX modes.
Radioberry is designed to run on Raspberry Pi hardware and is licensed to use the official “Powered by Raspberry Pi” logo.
Main components on the Radioberry preamp
Radioberry preamp bill of materials (BOM)
137 components, 59 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LD1117S33 | V-REG_SOT223 | IC101 |
| 1 | ST1S10 | ST1S10 | U101 |
| 1 | LP2985 | SOT23 | U102 |
| 1 | MAX11613 | MAX11613 | U201 |
| 1 | MCP4662 | SOIC-10 | U202 |
| 1 | INA199A1DC | PE4259 | U301 |
| 1 | DMP3099L | SOT23_3 | Q101 |
| 1 | MCP9700 | SOT23_3 | Q201 |
| 2 | NUD3124 | SOT23_3 | Q202, Q203 |
| 2 | LDMOS | COMBORFGND | Q301, Q302 |
| 1 | PS | PWRBARREL2 | CN101 |
| 7 | JNC | SMD-0603 | J201, J202, J203, J205, J207, J301, J302 |
| 2 | DNI | SMD-0603 | J204, J206 |
| 2 | RFD2b | 2x1 | DB201, DB202 |
| 1 | IO10 | 5x2 | DB203 |
| 1 | Polyfuse | FUSE | F101 |
| 1 | PINHEAD_PINHD-2X10 | PINHEAD_2X10 | JP201 |
| 1 | NA3WK-K | DPDT_GND | K301 |
| 5 | DNI | m3 | MH1, MH2, MH3, MH4, MH5 |
| 3 | SMA | SMAEDGE_THFULL_L | RF301, RF302, RF303 |
Show 39 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4:1 Z | BN202V | T301 |
| 1 | 1:1 | TRANSFSMT | T302 |
| 1 | TVSANTI | smbj18ca | D101 |
| 3 | FB | SMD-0603 | FB101, FB102, FB201 |
| 1 | 3.3uH | GENERICPSL | L101 |
| 4 | 10uF | SMD-1206 | C101, C102, C110, C113 |
| 1 | 4.7uF | SMD-0805 | C103 |
| 1 | 4n7 | SMD-0603 | C104 |
| 6 | 22uF | SMD-0805 | C105, C106, C107, C108, C109, C305 |
| 5 | 1uF | SMD-0805 | C111, C306, C307, C308, C309 |
| 3 | 100nF | SMD-0603 | C112, C114, C117 |
| 2 | 1nF | SMD-0603 | C115, C123 |
| 1 | 10nF | SMD-0603 | C116 |
| 1 | 100uF | SMD-1206 | C118 |
| 2 | 10pF | SMD-0603 | C119, C121 |
| 2 | 100pF | SMD-0603 | C120, C122 |
| 4 | 4.7nF | SMD-0603 | C201, C203, C207, C208 |
| 17 | 0.1uF | SMD-0603 | C202, C206, C209, C303, C304, C311, C313, C314 +9 |
| 4 | 1uF | SMD-0603 | C204, C205, C210, C211 |
| 2 | DNI | SMD-0805 | C301, C302 |
| 1 | 100pF | SMD-0805 | C310 |
| 1 | 390pF | SMD-0805 | C312 |
| 3 | 10K | SMD-0603 | R101, R214, R215 |
| 1 | 16K2 | SMD-0603 | R102 |
| 1 | 1K8 | SMD-0603 | R103 |
| 1 | 4k7 | SMD-0603 | R104 |
| 4 | 2.2K | SMD-0603 | R201, R202, R217, R218 |
| 4 | 1K | SMD-0603 | R203, R206, R208, R209 |
| 4 | 100 | SMD-0603 | R204, R207, R220, R221 |
| 3 | 270 | SMD-0603 | R205, R304, R311 |
| 2 | 27K | SMD-0603 | R210, R211 |
| 2 | 9.1K | SMD-0603 | R212, R213 |
| 2 | 4.7K | SMD-0603 | R216, R219 |
| 2 | DNI | SMD-0805 | R301, R302 |
| 1 | 0.04 | SMD-1206 | R303 |
| 2 | 1K | SMD-0805 | R305, R308 |
| 2 | 12 | SMD-0805 | R306, R312 |
| 1 | 5.769 | SMD-0805 | R307 |
| 2 | 869.548 | SMD-0805 | R309, R310 |
Radioberry preamp design files
The KiCad project lives in the pa3gsb/Radioberry-2.x repository on GitHub; these links point at the commit this page was built from.
Radioberry preamp: common questions
How big is the Radioberry preamp PCB?
The Radioberry preamp measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Radioberry preamp?
137 components, from 59 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Radioberry preamp design files?
From the pa3gsb/Radioberry-2.x repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Radioberry preamp design in my own project?
The repository has no license, so all rights stay with pa3gsb. Use it as a reference, and ask the author before reusing the design.
More boards in Radioberry-2.x
Similar boards
Eecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979