Zturn35
mrieker·pdp8l·zturn/zturn35/zturn35.kicad_pcb
About the Zturn35 PCB
Zturn35 is an open source PCB design by mrieker, published on GitHub. It is a 4-layer board measuring 189.9 × 54 mm, with 38 components from 8 distinct parts.
Other key parts include the 74AXP4T245. By type, the board carries 15 transistors, 4 ICs, 4 resistors and 1 capacitor.
From the project
PDP-8/L project files
* automated front-panel replacement raspberry-pi based circuit board plugs in front slot raspi program runs TCL scripts to load and run tests (maindec and otherwise)
pipan8l/pcb - circuit board pipan8l/pipan8l - raspi program provides TCL commands to access light & switch signals
* automated front-panel overlay I2C based circuit board piggy-backs onto row 1 of backplane with real panel plugged into slot 1 connects to zturn board plugged into row 36 via 3-wire I2C cable zturn program runs TCL scripts to load and run tests (maindec and otherwise)
Main components on the Zturn35
Zturn35 bill of materials (BOM)
38 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 74AXP4T245 | TSSOP-16_4.4x5mm_P0.65mm | U9, U10, U11, U12 |
| 15 | SSM6N15AFU | SOT-363_SC-70-6 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +7 |
| 8 | 0.1u | C_0201_0603Metric | CA9, CA10, CA11, CA12, CB9, CB10, CB11, CB12 |
| 3 | Conn_02x18_Odd_Even | PinHeader_2x18_P2.54mm_Vertical | JB35, JC35, JD35 |
| 3 | 2x18edgecon | 2x18-edge | JB36, JC36, JD36 |
| 1 | 10u | C_1206_3216Metric | C3 |
| 2 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R4 |
| 2 | 10K | R_0201_0603Metric | R2, R3 |
Zturn35 design files
The KiCad project lives in the mrieker/pdp8l repository on GitHub; these links point at the commit this page was built from.
Zturn35: common questions
How big is the Zturn35 PCB?
The Zturn35 measures 189.9 × 54 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Zturn35?
38 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Zturn35 design files?
From the mrieker/pdp8l repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Zturn35 design in my own project?
The repository has no license, so all rights stay with mrieker. Use it as a reference, and ask the author before reusing the design.
More boards in pdp8l
Z8lpanel
mrieker
262.3 × 16.2 mm54 parts6LNo license1Zturn36
mrieker
189.9 × 136.5 mm52 parts4LNo license1Pipan8l
mrieker
262.3 × 76.2 mm52 parts2LNo license1Ztm906
mrieker
56.5 × 136.5 mm20 parts2LNo license1Zturn34b
mrieker
56.5 × 54 mm19 parts4LNo license1Zturn34d
mrieker
59.7 × 54 mm12 parts4LNo license1Zturnic
mrieker
31.8 × 50.8 mm3 parts2LNo license1