Pipan8l
mrieker·pdp8l·pipan8l/pcb3/pipan8l.kicad_pcb
About the Pipan8l PCB
Pipan8l is an open source PCB design by mrieker, published on GitHub. It is a 2-layer board measuring 262.3 × 76.2 mm, with 52 components from 15 distinct parts.
Other key parts include the MCP23017. By type, the board carries 19 resistors, 16 transistors, 8 connectors, 5 capacitors and 4 ICs.
From the project
PDP-8/L project files
The pipan8l program runs on a RasPI-Zero-W plugged into the pcb that is then plugged into slot 1 of the PDP-8/L replacing its front panel.
RasPI-Zero-W uses /dev/i2c-1 to access the I2C bus going to the PCB. Any RasPI that runs recent RasPI OS and has a 40-pin GPIO connector should work, but I use a RasPI Zero because it is small, allowing me to flip the processor over without any issue.
Main components on the Pipan8l
Pipan8l bill of materials (BOM)
52 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | MCP23017 | DIP-28_W7.62mm_LongPads | U1, U2, U3, U4 |
| 16 | 2N3906 | TO-92_Inline_W4.0mm_Horizontal_FlatSideDown | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +8 |
| 1 | 2x18edgecon | backpins-A | J1 |
| 1 | 2x18edgecon | backpins-B | J2 |
| 1 | 2x18edgecon | backpins-C | J3 |
| 1 | 2x18edgecon | backpins-D | J4 |
| 1 | Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J5 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x16 | PinHeader_1x16_P2.54mm_Horizontal | J7 |
| 1 | Conn_01x12 | PinHeader_1x12_P2.54mm_Horizontal | J8 |
| 4 | 0.1u | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C2, C3, C4, C5 |
| 1 | 10u | C_Disc_D5.0mm_W2.5mm_P5.00mm | C6 |
| 16 | 4.7K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +8 |
| 2 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R22, R23 |
| 1 | 2.2K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R24 |
Pipan8l design files
The KiCad project lives in the mrieker/pdp8l repository on GitHub; these links point at the commit this page was built from.
- Layoutpipan8l/pcb3/pipan8l.kicad_pcb
- Schematicpipan8l/pcb3/pipan8l.kicad_sch
Pipan8l: common questions
How big is the Pipan8l PCB?
The Pipan8l measures 262.3 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pipan8l?
52 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pipan8l design files?
From the mrieker/pdp8l repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pipan8l design in my own project?
The repository has no license, so all rights stay with mrieker. Use it as a reference, and ask the author before reusing the design.
More boards in pdp8l
Z8lpanel
mrieker
262.3 × 16.2 mm54 parts6LNo license1Zturn36
mrieker
189.9 × 136.5 mm52 parts4LNo license1Zturn35
mrieker
189.9 × 54 mm38 parts4LNo license1Ztm906
mrieker
56.5 × 136.5 mm20 parts2LNo license1Zturn34b
mrieker
56.5 × 54 mm19 parts4LNo license1Zturn34d
mrieker
59.7 × 54 mm12 parts4LNo license1Zturnic
mrieker
31.8 × 50.8 mm3 parts2LNo license1