USB-C Socket FullSpeed SRV05
mrred2k·Kicad_Design_Blocks·blocks.kicad_blocks/USB-C_Socket_FullSpeed_SRV05.kicad_block/USB-C_Socket_FullSpeed_SRV05.kicad_pcb
About the USB-C Socket FullSpeed SRV05 PCB
USB-C Socket FullSpeed SRV05 is an open source PCB design by mrred2k, published on GitHub. It is a 2-layer board measuring 5.1 × 8.4 mm, with 4 components from 3 distinct parts.
Other key parts include the SRV05-4. By type, the board carries 2 resistors, 1 IC and 1 connector.
From the project
USB 2.0 Type-C receptacle (HRO TYPE-C-31-M-12) as a 5V sink for full-speed devices: 5.1k pulldowns on CC1/CC2, ESD array SRV05-4 (SOT-23-6, 0.3 pF, 4 channels) protecting D+, D-, CC1 and CC2, VP tied to VBUS (5V), VN to GND. No 1.5k data pull-up - full-speed devices with an inter
USB 2.0 Type-C receptacle (HRO TYPE-C-31-M-12) as a 5V sink for full-speed devices: 5.1k pulldowns on CC1/CC2, ESD array SRV05-4 (SOT-23-6, 0.3 pF, 4 channels) protecting D+, D-, CC1 and CC2, VP tied to VBUS (5V), VN to GND. No 1.5k data pull-up - full-speed devices with an internal pull-up (CH340, RP2040, STM32) connect directly. Preferred over USB-CSocketFullSpeed, which uses two 3.6V zeners: the array has roughly 300x lower line capacitance, clamps in nanoseconds instead of microseconds and also protects the CC lines. Socket and ESD array are LCSC Extended (the JLC catalogue has no Basic…
Main components on the USB-C Socket FullSpeed SRV05
USB-C Socket FullSpeed SRV05 bill of materials (BOM)
4 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SRV05-4 | SOT-23-6 | U6 |
| 1 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 2 | 0603WAF100JT5E 5.1k | R_0603_1608Metric | R12, R13 |
USB-C Socket FullSpeed SRV05 design files
The KiCad project lives in the mrred2k/Kicad_Design_Blocks repository on GitHub; these links point at the commit this page was built from.
USB-C Socket FullSpeed SRV05: common questions
How big is the USB-C Socket FullSpeed SRV05 PCB?
The USB-C Socket FullSpeed SRV05 measures 5.1 × 8.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB-C Socket FullSpeed SRV05?
4 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the USB-C Socket FullSpeed SRV05 design files?
From the mrred2k/Kicad_Design_Blocks repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the USB-C Socket FullSpeed SRV05 design in my own project?
The repository has no license, so all rights stay with mrred2k. Use it as a reference, and ask the author before reusing the design.
More boards in Kicad_Design_Blocks
USB-C Socket HID
mrred2k
8 parts2LNo license2Stepdown 24VIn 5VOut
mrred2k
13.4 × 8.6 mm7 parts2LNo license2Mosfet Pair 24VfromMCU
mrred2k
4 × 7 mm7 parts2LNo license2USB-C Socket FullSpeed
mrred2k
8.6 × 8 mm5 parts2LNo license2LinearReg XC6206P332MR-G
mrred2k
7.9 × 6.3 mm4 parts2LNo license2LinearRegulator XC6206P
mrred2k
0.8 × 5.3 mm3 parts2LNo license2