278 open source boards using the SRV05-4
Real designs built with the SRV05-4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3kESP32
SmartSpin2k
doudar
57.2 × 60.3 mm79 parts2LGPL-2.0291RP2040/RP2350
ErgoSNM right
siderakb
115.6 × 106.7 mm101 parts2LCERN-OHL-P-2.0170ESP32
Spark-Analyzer
tooyipjee
46.5 × 40 mm67 parts4LMIT168AVR/Arduino
QEZ
str-dst
194.3 × 79 mm78 parts2LCC-BY-NC-4.0111ESP32
HB-RF-ETH
alexreinert
85 × 56 mm86 parts2LCC-BY-NC-4.0104STM32
E80-1800-pcb universal
ebastler
382 × 160 mm200 parts2LBSD-2-Clause86Nordic nRF
Fusion
crides
125.8 × 91.8 mm100 parts2LNo license82STM32
Bonsai C4
customMK
17.8 × 51.6 mm48 parts4LCERN-OHL-P-2.071AVR/Arduino
Gh80-3003
evyd13
444.1 × 151.2 mm276 parts2LCC-BY-SA-4.069STM32
Unicorn
yanghu
268.2 × 110.5 mm142 parts2LMIT63RP2040/RP2350
Sweep
waffle87
216.9 × 86.9 mm208 parts2LSHL-2.157Sbus to ztex
MelkhiorVintageComputing
99.7 × 83.8 mm61 parts4LCC-BY-NC-4.054STM32
Proteus
mck1117
135 × 82.5 mm348 parts4LNo license50AVR/Arduino
AVR-Transistor-Tester
Upcycle-Electronics
141 × 66 mm55 parts2LNo license49AVR/Arduino
Twelvekey
str-dst
75.2 × 62.6 mm52 parts2LCC-BY-NC-4.049RP2040/RP2350
Buran-Ortho
ScatteredDrifter
224.4 × 97.8 mm100 parts2LCERN-OHL-P-2.046RP2040/RP2350
Usb3sun
delan
35.6 × 94.6 mm51 parts2LISC45ESP32
Sonatino
luminationlabs
65 × 30 mm117 parts4LCERN-OHL-P-2.039RP2040/RP2350
Quacken
Nuclear-Squid
262 × 113.9 mm44 parts2LGPL-3.038Nordic nRF
Hotswap ble
ebastler
271.8 × 103.9 mm134 parts2LCC-BY-NC-4.037JTAG-SWD-adapter
Neofoxx
91.3 × 48.3 mm98 parts2LNo license36ESP32
Blinkekatze
TobleMiner
83 × 83 mm106 parts4LNo license34AVR/Arduino
Vault35 ortho
galvy0
209.7 × 76.4 mm131 parts2LUnlicense33RP2040/RP2350
Slime88
zykrah
344.7 × 123.6 mm225 parts2LCERN-OHL-S-2.029AVR/Arduino
67mk E
str-dst
303.2 × 97.6 mm134 parts2LCC-BY-NC-4.029ESP32
Bobbycar-FOC-hardware
bobbycar-graz
120 × 90 mm293 parts2LNo license23Raspberry Pi
Wave
Libre-Talk
88 × 88 mm157 parts2LNo license22Nordic nRF
Cenere-Mouse
willwaush
47.8 × 89 mm104 parts4LCC-BY-NC-4.022RP2040/RP2350
Ink screen badge for Undercity
cheyao
96.8 × 91.4 mm86 parts2LSHL-2.122STM32
Polygonus
FOME-Tech
103 × 82.4 mm299 parts4LNo license21AVR/Arduino
Mikeneko-65
takishim
303.8 × 94.2 mm152 parts2LMIT21RP2040/RP2350
Memoria
shinkaimayano
242.9 × 96.8 mm145 parts2LMIT20AVR/Arduino
GameHand
str-dst
143.7 × 111.3 mm71 parts2LCC-BY-NC-4.020STM32
DD Compute 2
Acmex2564
200 × 65 mm175 parts4LNo license19
How designs wire the SRV05-4
Read from the KiCad layouts of 206 open source designs, one per repository: what each pin of the SRV05-4 connects to, and the resistors, capacitors and other passives placed on it.
- The VN pin is tied to GND on 198 of 206 designs (a signal on 6).
- The IO1 pin has a series resistor on 89 of 205 designs, most often 22 Ω (then 27 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IO1pin 1 | Connected to: A connector 75%, the microcontroller 29% |
|
| VNpin 2 | Connected to: GND 96% | — |
| IO3pin 4 | Connected to: A connector 45% · not connected 41% |
|
| VPpin 5 | Connected to: 5V 89% | — |
| IO4pin 6 | Connected to: A connector 54%, the microcontroller 23% · not connected 32% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LumenPnP Motherboard by opulo-inc, Ferris by pierrechevalier83, Hillside 46 Keyboard by mmccoyd and SmartSpin2k by doudar.
The SRV05-4 in open source designs
The gallery holds 278 open source boards using the SRV05-4 from 209 GitHub repositories; a typical one measures about 100 × 80.2 mm and carries around 97 components.
73% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is LumenPnP Motherboard by opulo-inc.
Parts used alongside the SRV05-4
Microcontrollers on boards using the SRV05-4
What boards using the SRV05-4 are built for
SRV05-4: common questions
Where can I find a SRV05-4 reference design?
Each of the 278 boards on this page is a real design using the SRV05-4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SRV05-4 VN pin connected?
The VN pin is tied to GND on 198 of 206 designs (a signal on 6). Counted from the KiCad layouts of 206 open source designs using the SRV05-4.
What resistor goes on the SRV05-4 IO1 pin?
The IO1 pin has a series resistor on 89 of 205 designs, most often 22 Ω (then 27 Ω). Counted from the KiCad layouts of 206 open source designs using the SRV05-4.
What parts are used alongside the SRV05-4?
The RP2040, W25Q128JVS, AMS1117-3.3, XC6206PXXXMR and XC6206P332MR appear in the most repositories here.
Which microcontrollers do boards using the SRV05-4 use?
Most are built on STM32 (68), RP2040/RP2350 (64), AVR/Arduino (42) and ESP32 (37).
How big is a typical board using the SRV05-4?
The median is 100 × 80.2 mm, and 73% are two-layer designs.
What is the most popular open source board using the SRV05-4?
By GitHub stars, LumenPnP Motherboard by opulo-inc, with 3,655 stars.
Can I simulate one of these boards using the SRV05-4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.