Ecardz-Proto
mte-capstone-ecards·Ecardz-EE·Ecardz-Proto/Ecardz-Proto.kicad_pcb
About the Ecardz-Proto PCB
Ecardz-Proto is an open source STM32 PCB design by mte-capstone-ecards, published on GitHub. It is a 4-layer board measuring 110 × 90 mm, with 58 components from 22 distinct parts.
Its main chip is the STM32L071K8U6, from the STM32 family. Other key parts include the M24LR04E-RDW6T/2. By type, the board carries 25 resistors, 22 capacitors, 4 diodes, 3 connectors, 2 ICs and 1 transistor.
From the project
Electronic cards
Main components on the Ecardz-Proto
Ecardz-Proto bill of materials (BOM)
58 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | M24LR04E-RDW6T/2 M24LR04E-RMN6T/2 | SO-8_3.9x4.9mm_P1.27mm | IC1 |
| 1 | STM32L071K8U6 STM32L071K8Ux | QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U1 |
| 1 | IRLML2803TRPBF NMOS | SOT-23 | Q1 |
| 1 | PH2-12-UA Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Vertical | J1 |
| 1 | 4-1734839-5 Conn_01x24 | TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal | J2 |
| 1 | 3220-14-0300-00 Conn_02x07_Odd_Even | PinSocket_2x07_P1.27mm_Vertical_SMD | J4 |
| 3 | MBR0530T1G D_Schottky | D_SOD-123 | D1, D2, D3 |
| 1 | MMSZ4684T1G D_Zener | D_SOD-123 | D4 |
| 1 | CDRH5D18NP-470NC L | CDRH5D18 | L1 |
| 13 | CC0603KRX5R8BB105 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4, C5, C6, C7, C9, C11 +5 |
| 1 | 100pF DNP | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 3 | TBD | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C10, C12 |
| 1 | TBD | C_2917 | C14 |
| 1 | C0603C102K5RACTU 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15 |
| 2 | GRM0335C1E7R0CA01D 7pF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C20, C21 |
| 1 | TBD | C_Elec_10x10.2 | C22 |
| 1 | RC0603FR-072R2L 2.2R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 2 | RC0603JR-070RL 0R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 5 | 100kR DNP | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6, R7, R8 |
| 12 | RC0603JR-070RL DNP | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R11, R12, R13, R14, R15, R16 +4 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 100kR 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19, R20, R21, R24 |
| 1 | CRCW0603590RFKEA 600R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25 |
Ecardz-Proto design files
The KiCad project lives in the mte-capstone-ecards/Ecardz-EE repository on GitHub; these links point at the commit this page was built from.
Ecardz-Proto: common questions
What microcontroller does the Ecardz-Proto use?
The Ecardz-Proto is built around the STM32L071K8U6, from the STM32 family.
How big is the Ecardz-Proto PCB?
The Ecardz-Proto measures 110 × 90 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Ecardz-Proto?
58 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ecardz-Proto design files?
From the mte-capstone-ecards/Ecardz-EE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ecardz-Proto design in my own project?
The repository has no license, so all rights stay with mte-capstone-ecards. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ecardz-Proto without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Ecardz-EE
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k