Ecardz-Controller
mte-capstone-ecards·Ecardz-EE·Ecardz-Controller/Ecardz-Controller.kicad_pcb
About the Ecardz-Controller PCB
Ecardz-Controller is an open source STM32 PCB design by mte-capstone-ecards, published on GitHub. It is a 4-layer board measuring 189 × 115 mm, with 162 components from 56 distinct parts.
Its main chip is the STM32G0C1RETx, from the STM32 family. Other key parts include the ST25R3916B-AQWT, INA180A2IDBVR, TPS62160DSG, MIC5504-3.3YM5-TR and CP2110-F02-GM1. By type, the board carries 60 capacitors, 59 resistors, 12 diodes, 11 connectors, 6 ICs and 6 switches.
From the project
Electronic cards
Main components on the Ecardz-Controller
Ecardz-Controller bill of materials (BOM)
162 components, 56 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ST25R3916B-AQWT | QFN50P500X500X100-33N-D | IC1 |
| 1 | INA180A2IDBVR | SOT95P280X145-5N | IC2 |
| 1 | STM32G0C1RETx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TPS62160DSG | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U2 |
| 1 | MIC5504-3.3YM5-TR MIC5504-3.3YM5 | SOT-23-5 | U3 |
| 1 | CP2110-F02-GM1 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U4 |
| 1 | IRLML2803TRPBF NMOS | SOT-23 | Q1 |
| 1 | TMBT3904,LM | TMBT3904LM | Q2 |
| 1 | XRCGB27M120F3M00R0 | XRCGB | Y1 |
| 1 | MEM2061-01-188-00-A | MEM20610118800A | J1 |
| 3 | 61300411121 Conn_01x04 | PinHeader_1x04_P2.54mm_Horizontal | J2, J8, J9 |
| 1 | 61300511121 Conn_01x05 | PinHeader_1x05_P2.54mm_Horizontal | J3 |
| 1 | 61300911121 Conn_01x09 | PinHeader_1x09_P2.54mm_Horizontal | J4 |
| 1 | 61300111121 Conn_01x01 | PinHeader_1x01_P2.54mm_Horizontal | J5 |
| 1 | 10051922-2410ELF Conn_01x24 | TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal | J6 |
| 2 | 61300211121 Conn_01x02 | PinHeader_1x02_P2.54mm_Horizontal | J7, J10 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Horizontal | J11 |
| 1 | PS1240P02BT | PS1240P02BT | LS1 |
| 6 | PRT-14460 | PRT14460 | S1, S2, S3, S4, S5, S6 |
| 3 | 150060GS75000 LED-G | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D7, D8 |
Show 36 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 150060RS75000 LED-R | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D5 |
| 2 | 150060BS75000 LED-B | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3, D4 |
| 3 | MBR0530T1G D_Schottky | D_SOD-123 | D9, D10, D11 |
| 2 | RB521S30T1G | D_SOD-523 | D12, D13 |
| 1 | CDRH5D18NP-470NC L | CDRH5D18 | L1 |
| 1 | VLS201610CX-2R2M-1 2.2uH | VLS2016 | L2 |
| 2 | CDRH5D18NP-470NC 270nH | L_0603_1608Metric | L3, L4 |
| 2 | CC0603KRX5R8BB105 8.2p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4 |
| 6 | CC0603KRX5R8BB105 2.2u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C5, C6, C11, C13, C15 |
| 6 | CC0603KRX5R8BB105 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C7, C8, C12, C14, C18 |
| 22 | CC0603KRX5R8BB105 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C17, C20, C23, C24, C25, C27, C28 +14 |
| 1 | CC0603KRX5R8BB105 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | CC0603KRX5R8BB105 22n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16 |
| 4 | CC0603KRX7R7BB104 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19, C21, C37, C41 |
| 3 | CL10A475KP8NNNC 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22, C39, C40 |
| 1 | 100pF DNP | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C26 |
| 1 | GRM21BR61C106KE15K 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C33 |
| 1 | GRM21BR61A226ME51K 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C34 |
| 3 | LXRW0YV600-054 | LXRW0YV600054 | C42, C43, C44 |
| 2 | CC0603KRX5R8BB105 680pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C45, C46 |
| 2 | CC0603KRX5R8BB105 180pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C47, C48 |
| 2 | CC0603KRX5R8BB105 82pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C49, C52 |
| 2 | CC0603KRX5R8BB105 10pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C50, C51 |
| 1 | CC0603KRX5R8BB105 240pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C53 |
| 14 | CRCW0603590RFKEA 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R4, R5, R6, R41, R42, R43 +6 |
| 1 | CRCW0603590RFKEA .5R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 24 | RC0603FR-0710KL 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R9, R10, R11, R12, R15, R16 +16 |
| 5 | ERJ-3EKF4701V 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14, R17, R18, R59 |
| 1 | RC0603FR-071KL 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19 |
| 1 | RC0603FR-072R2L 2.2R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27 |
| 1 | 100kR DNP | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R28 |
| 6 | RC0603JR-070RL 0R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29, R30, R36, R38, R39, R40 |
| 2 | RC0603FR-07100KL 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31, R34 |
| 1 | ERJ-3EKF7873V 787K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32 |
| 1 | RC0603JR-07200KL 200k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R33 |
| 2 | RC0603JR-070RL 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R35, R37 |
Ecardz-Controller design files
The KiCad project lives in the mte-capstone-ecards/Ecardz-EE repository on GitHub; these links point at the commit this page was built from.
Ecardz-Controller: common questions
What microcontroller does the Ecardz-Controller use?
The Ecardz-Controller is built around the STM32G0C1RETx, from the STM32 family.
How big is the Ecardz-Controller PCB?
The Ecardz-Controller measures 189 × 115 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Ecardz-Controller?
162 components, from 56 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ecardz-Controller design files?
From the mte-capstone-ecards/Ecardz-EE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ecardz-Controller design in my own project?
The repository has no license, so all rights stay with mte-capstone-ecards. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ecardz-Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Ecardz-EE
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k