ClickTest
mtfinding·ClickTest·hw/hw_motherboard/hw_motherboard.kicad_pcb
About the ClickTest PCB
ClickTest is an open source PCB design by mtfinding, published on GitHub. It is a 2-layer board measuring 180.3 × 121.9 mm, with 315 components from 52 distinct parts.
Other key parts include the TCA9555PWR. By type, the board carries 135 resistors, 104 diodes, 21 jumpers, 18 connectors, 16 capacitors and 7 ICs.
From the project
Automated continuity testing device
This repository contains the finalized source-code and hardware design documents of an automated hardware-tester. The projects was created as part of bachelor-thesis and is specifically designed for the Nucleo L432KC development board in combination with a propriatory harwdare expander used at my uni FHTW) ## Features
- Automated Continuity Testing: The device automates the continuity testing process, reducing manual effort and increasing efficiency. - Terminal Interface: A 115200baud UART terminal is available to visulaize test-results and select from certain testing-options. - Quick-Test…

Main components on the ClickTest
ClickTest bill of materials (BOM)
315 components, 52 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | TCA9555PWR | TSSOP-24_4.4x7.8mm_P0.65mm | U101, U201, U301, U302, U401, U601, U602 |
| 1 | 2N7000 | TO-92_Inline | Q601 |
| 1 | CON_C1_L | PinHeader_1x08_P2.54mm_Vertical | J101 |
| 1 | CON_C1_R | PinHeader_1x08_P2.54mm_Vertical | J102 |
| 1 | CON_C2_L | PinHeader_1x08_P2.54mm_Vertical | J201 |
| 1 | CON_C2_R | PinHeader_1x08_P2.54mm_Vertical | J202 |
| 1 | CON_C3_L | PinHeader_1x15_P2.54mm_Vertical | J301 |
| 1 | CON_C3_R | PinHeader_1x15_P2.54mm_Vertical | J302 |
| 1 | CON_CTOP_L | PinHeader_1x07_P2.54mm_Vertical | J401 |
| 1 | CON_CTOP_R | PinHeader_1x07_P2.54mm_Vertical | J402 |
| 1 | CON_MCU_L | PinSocket_1x15_P2.54mm_Vertical | J501 |
| 1 | CON_MCU_R | PinSocket_1x15_P2.54mm_Vertical | J502 |
| 1 | CON_DUT_L | PinSocket_1x20_P2.54mm_Vertical | J601 |
| 1 | CON_DUT_R | PinSocket_1x20_P2.54mm_Vertical | J602 |
| 6 | PicoBlade_53047 | Molex_PicoBlade_53047-0610_1x06_P1.25mm_Vertical | J701, J702, J703, J704, J705, J706 |
| 9 | SnakeBite | JLC_SnakeBite_1.27mm | H705, H706, H707, H708, H709, H710, H711, H712 +1 |
| 1 | C1_A0 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP101 |
| 1 | C1_A1 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP102 |
| 1 | C1_A2 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP103 |
| 1 | C2_A0 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP201 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2_A1 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP202 |
| 1 | C2_A2 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP203 |
| 1 | C3_L_A0 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP301 |
| 1 | C3_R_A0 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP302 |
| 1 | C3_L_A1 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP303 |
| 1 | C3_R_A1 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP304 |
| 1 | C3_L_A2 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP305 |
| 1 | C3_R_A2 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP306 |
| 1 | TOP_A0 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP401 |
| 1 | TOP_A1 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP402 |
| 1 | TOP_A2 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP403 |
| 1 | ZIF_L_A0 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP601 |
| 1 | ZIF_L_A1 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP602 |
| 1 | ZIF_L_A2 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP603 |
| 1 | ZIF_R_A0 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP604 |
| 1 | ZIF_R_A1 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP605 |
| 1 | ZIF_R_A2 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP606 |
| 1 | SW_RST | SW_PUSH_6mm | SW501 |
| 1 | SW_UI | SW_PUSH_6mm | SW502 |
| 2 | TestPoint | TestPoint_Keystone_5000-5004_Miniature | TP501, TP647 |
| 96 | SD05C.TCT | D_SOD-323_HandSoldering | D101, D102, D103, D104, D105, D106, D107, D108 +88 |
| 4 | 1N4148WS | D_SOD-323F | D501, D502, D503, D504 |
| 1 | LED_Red | LED_0603_1608Metric | D505 |
| 3 | LED_Green | LED_0603_1608Metric | D506, D507, D508 |
| 7 | C_0603_1U C_0603_1u | C_0603_1608Metric | C101, C201, C301, C302, C401, C601, C603 |
| 9 | C_0603_100N C_0603_100n | C_0603_1608Metric | C102, C202, C303, C304, C402, C501, C502, C602 +1 |
| 11 | R_0603_10K R_0603_10k | R_0603_1608Metric | R101, R201, R301, R302, R401, R501, R505, R507 +3 |
| 97 | R_0402_200 | R_0402_1005Metric | R102, R103, R104, R105, R106, R107, R108, R109 +89 |
| 16 | 0R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R416, R417, R418, R419, R511, R512, R513, R514 +8 |
| 4 | R_0603_2.2K R_0603_2.2k | R_0603_1608Metric | R502, R503, R504, R506 |
| 5 | R_0603_1K R_0603_1k | R_0603_1608Metric | R508, R509, R510, R516, R517 |
| 2 | 0R_DNI | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R614, R633 |
ClickTest design files
The KiCad project lives in the mtfinding/ClickTest repository on GitHub; these links point at the commit this page was built from.
ClickTest: common questions
How big is the ClickTest PCB?
The ClickTest measures 180.3 × 121.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ClickTest?
315 components, from 52 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ClickTest design files?
From the mtfinding/ClickTest repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ClickTest design in my own project?
The repository has no license, so all rights stay with mtfinding. Use it as a reference, and ask the author before reusing the design.