Micro keypad

mud-ali·micro_keypad·kpad_pcb/keypad.kicad_pcb

Micro keypad PCB layout, top view — open source STM32 board by mud-ali

About the Micro keypad PCB

Micro keypad is an open source STM32 PCB design by mud-ali, published on GitHub. It is a 2-layer board measuring 94.8 × 70.5 mm, with 32 components from 16 distinct parts.

Its main chip is the STM32F030R8Tx, from the STM32 family. Other key parts include the AP2112K-3.3 and CP2102N-Axx-xQFN24. By type, the board carries 11 capacitors, 6 resistors, 5 switches, 4 diodes, 3 ICs and 2 connectors.

From the project

4 button keypad with LEDs

a simple, 4 button keypad based on an STM32 MCU

Main components on the Micro keypad

Micro keypad bill of materials (BOM)

32 components, 16 distinct parts.

QtyPartRefs
1
AP2112K-3.3
U1
1
STM32F030R8Tx
U2
1
CP2102N-Axx-xQFN24
U3
1
Conn_01x05
J1
1
Conn_01x02
J3
4
SW_Push
SW1, SW2, SW3, SW4
1
C128955
韩国韩荣
SW6
1
AF 90° WJDG
SHOU HAN(首韩)
USB1
4
LED
D1, D2, D3, D4
4
100nF
C1, C2, C3, C11
2
10uF
C5, C12
3
1uF
C6, C9, C10
1
10nF
C7
1
0.1uF
C8
2
10k
R1, R2
4
220
R3, R4, R5, R6

Micro keypad design files

The KiCad project lives in the mud-ali/micro_keypad repository on GitHub; these links point at the commit this page was built from.

Micro keypad: common questions

What microcontroller does the Micro keypad use?

The Micro keypad is built around the STM32F030R8Tx, from the STM32 family.

How big is the Micro keypad PCB?

The Micro keypad measures 94.8 × 70.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Micro keypad?

32 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Micro keypad design files?

From the mud-ali/micro_keypad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Micro keypad design in my own project?

The repository has no license, so all rights stay with mud-ali. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Micro keypad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards