57 open source boards using the CP2102N-Axx-xQFN24

Real designs built with the CP2102N-Axx-xQFN24, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

57 boardsClear filters|Most starred

How designs wire the CP2102N-Axx-xQFN24

Read from the KiCad layouts of 43 open source designs, one per repository: what each pin of the CP2102N-Axx-xQFN24 connects to, and the resistors, capacitors and other passives placed on it.

  • The DSR pin is left unconnected on 42 of 43 designs.
  • The RI/CLK pin is left unconnected on 41 of 43 designs (a signal on 2).
  • The WAKEUP/GPIO.3 pin is left unconnected on 41 of 43 designs (a signal on 2).
  • The RS485/GPIO.2 pin is left unconnected on 41 of 43 designs (a signal on 2).
RI/CLKpin 1Connected to: Not connected 95%
GNDpin 2, 25Connected to: GND 98%
VIOpin 5Connected to: 3.3V 70% · a signal 26%
  • Decoupling capacitor on 74% · 100 nF (32), 4.7 µF (17), 10 µF (10)
VDDpin 6Connected to: 3.3V 70% · a signal 28%
  • Decoupling capacitor on 77% · 100 nF (32), 4.7 µF (18), 1 µF (7)
VREGINpin 7Connected to: 3.3V 81%
  • Decoupling capacitor on 67% · 100 nF (26), 4.7 µF (18), 10 µF (7)
VBUSpin 8Connected to: Signal 70% · 5V 26%
  • Resistor to GND on 58% · 47.5 kΩ (12), 47 kΩ (6), 10 kΩ (3)
  • Pull-up to VBUS on 44% · 22.1 kΩ (10), 22 kΩ (4), 47 kΩ (2)
RSTpin 9Connected to: Signal 86%
  • Pull-up to 3.3V on 70% · 1 kΩ (15), 10 kΩ (7), 4.7 kΩ (3)
NCpin 10, 16Connected to: Not connected 100%
WAKEUP/GPIO.3pin 11Connected to: Not connected 95%
RS485/GPIO.2pin 12Connected to: Not connected 95%
RXT/GPIO.1pin 13Connected to: Not connected 74% · a signal 26%
TXT/GPIO.0pin 14Connected to: Not connected 74% · a signal 26%
SUSPENDpin 15, 17Connected to: Not connected 92%
CTSpin 18Connected to: Not connected 93%
RTSpin 19Connected to: Signal 74% · not connected 26%
  • Series resistor on 65% · 10 kΩ (26), 5 kΩ (1), 1 kΩ (1)
TXDpin 21Connected to: The microcontroller 60%
  • Series resistor on 30% · 0 Ω (4), 499 Ω (2), 1 kΩ (2)
DSRpin 22Connected to: Not connected 98%
DTRpin 23Connected to: Signal 77% · not connected 23%
  • Series resistor on 63% · 10 kΩ (25), 5 kΩ (1), 12 kΩ (1)
DCDpin 24Connected to: Not connected 95%

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include WaterRowerLinkPlus by nickbits1024, Blinky badge light by rowr111, LAN-Module by jorticus and Control Unit - CanSat 2023 by Project-SkyFall.

The CP2102N-Axx-xQFN24 in open source designs

The gallery holds 57 open source boards using the CP2102N-Axx-xQFN24 from 43 GitHub repositories; a typical one measures about 61.4 × 65 mm and carries around 64 components.

58% use four copper layers or more, and 44% carry an open source license.

The most starred is Blinky badge light by rowr111.

Microcontrollers on boards using the CP2102N-Axx-xQFN24

CP2102N-Axx-xQFN24: common questions

Where can I find a CP2102N-Axx-xQFN24 reference design?

Each of the 57 boards on this page is a real design using the CP2102N-Axx-xQFN24. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the CP2102N-Axx-xQFN24 DSR pin connected?

The DSR pin is left unconnected on 42 of 43 designs. Counted from the KiCad layouts of 43 open source designs using the CP2102N-Axx-xQFN24.

How is the CP2102N-Axx-xQFN24 RI/CLK pin connected?

The RI/CLK pin is left unconnected on 41 of 43 designs (a signal on 2). Counted from the KiCad layouts of 43 open source designs using the CP2102N-Axx-xQFN24.

How is the CP2102N-Axx-xQFN24 WAKEUP/GPIO.3 pin connected?

The WAKEUP/GPIO.3 pin is left unconnected on 41 of 43 designs (a signal on 2). Counted from the KiCad layouts of 43 open source designs using the CP2102N-Axx-xQFN24.

What parts are used alongside the CP2102N-Axx-xQFN24?

The AMS1117-3.3, AP2112K-3.3, ESP32-S3-WROOM-1, ESP32-WROOM-32E and USBLC6-2P6 appear in the most repositories here.

Which microcontrollers do boards using the CP2102N-Axx-xQFN24 use?

Most are built on ESP32 (38), RP2040/RP2350 (4), STM32 (3) and Silicon Labs (2).

How big is a typical board using the CP2102N-Axx-xQFN24?

The median is 61.4 × 65 mm, and 42% are two-layer designs.

What is the most popular open source board using the CP2102N-Axx-xQFN24?

By GitHub stars, Blinky badge light by rowr111, with 9 stars.

Can I simulate one of these boards using the CP2102N-Axx-xQFN24 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part