Toroufc
About the Toroufc PCB
Toroufc is an open source PCB design by mustang51, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 74.8 × 88.4 mm, with 39 components from 18 distinct parts.
Other key parts include the BluePill. By type, the board carries 22 diodes, 15 connectors, 1 IC and 1 resistor.
It belongs with the keyboards designs in this gallery.
From the project
USB Up Front Controller
USB Up Front Controller, attempting to represent multiple cockpits (F/A-18, F-16, F-15E, A-10C, AV-8B...)
12 button numerical pad. 10 button in both left and right vertical pads. 7 button in horizontal pad. 2 rotary encoders with push. 2 big buttons. 2 small buttons. 4 rockers (up/down). 2 triple position lever-switches, one with safety cover. 4 way dobber lever. 6 analog axis (4 lateral, 2 frontal).
Main components on the Toroufc
Toroufc bill of materials (BOM)
39 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BluePill | YAAJ_BluePill_1 | U1 |
| 1 | HAT | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J1 |
| 1 | RKR1-2 | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J2 |
| 1 | RKR3-4 | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J3 |
| 1 | LVR1-2 | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J4 |
| 1 | MASTER-BIG1 | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J5 |
| 1 | BIG2-3-4 | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J6 |
| 1 | NPAD | JST_XH_B10B-XH-A_1x10_P2.50mm_Vertical | J7 |
| 1 | HPAD | JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J8 |
| 1 | LPAD | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J9 |
| 1 | RPAD | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J10 |
| 1 | POT1-3 | JST_XH_B10B-XH-A_1x10_P2.50mm_Vertical | J11 |
| 1 | POT4-6 | JST_XH_B10B-XH-A_1x10_P2.50mm_Vertical | J12 |
| 1 | REN1 | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J13 |
| 1 | REN2 | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J14 |
| 1 | USB connector | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J16 |
| 22 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +14 |
| 1 | R1.5K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
Toroufc design files
The KiCad project lives in the mustang51/toro-ufc repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/main/toroufc.kicad_pcb
- Schematicpcb/main/toroufc.kicad_sch
Toroufc: common questions
How big is the Toroufc PCB?
The Toroufc measures 74.8 × 88.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Toroufc?
39 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Toroufc design files?
From the mustang51/toro-ufc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Toroufc design in my own project?
Yes, under the terms of its BSD-3-Clause license, which mustang51 chose for the repository.
byrantech
google