Amp600w
About the Amp600w PCB
Amp600w is an open source PCB design by mx-yah, published on GitHub. It is a 2-layer board measuring 200 × 100 mm, with 128 components from 49 distinct parts.
Other key parts include the NE5532ADR, LM1117-3.3, TL072, TPA3255 and LM2596HVS-ADJ, LM2596HV-12. By type, the board carries 53 capacitors, 44 resistors, 7 ICs, 5 inductors, 3 transistors and 3 crystals.
From the project
A high-performance high-power class-D amplifier that enables true premium sound quality with high-efficiency class-D technology
A high-performance high-power class-D amplifier that enables true premium sound quality with high-efficiency class-D technology
Based on the TPA3255DDV integrated circuit from Texas Instruments.
Main components on the Amp600w
Amp600w bill of materials (BOM)
128 components, 49 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE5532ADR | SO-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | LM1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 3 | TL072 | SO-8_3.9x4.9mm_P1.27mm | U3, U4, U5 |
| 1 | TPA3255 | TPA3255DDV | U6 |
| 1 | LM2596HVS-ADJ, LM2596HV-12 | TO-263-5_TabPin3 | U7 |
| 1 | IRF9540NSTRLPBF | TO-263-2 | Q3 |
| 1 | MMBT5401 | SOT-23 | Q4 |
| 1 | IRLML9303 | SOT-23 | Q6 |
| 1 | Power | TerminalBlock_Degson_DG25C-B_P7.62mm | X3 |
| 1 | Audio Output | TerminalBlock_Degson_DG25C-B_P7.62mm | X4 |
| 1 | Conn_04 | FanPinHeader_1x04_P2.54mm_Vertical | X7 |
| 1 | AudioJack3 | Jack_3.5mm_Switronic_ST-005-G_horizontal | J1 |
| 1 | XLR3_Ground | Jack_XLR_Neutrik_NC3FAH2_Horizontal | J2 |
| 1 | Heatsink | HEATSINK_LGA1156 | HS1 |
| 1 | Jumper_NO_Small | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | 10k LIN | Potentiometer_Piher_T-16H_Single_Horizontal | RV1 |
| 1 | 10кОм 3455K | R_0603_1608Metric | TH1 |
| 1 | SS510 | D_SMC | VD1 |
| 3 | SMBJ10CA | D_SMB | VD2, VD3, VD4 |
| 1 | LED | LED_D3.0mm | HL1 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LED | LED_D3.0mm_Horizontal_O6.35mm_Z6.0mm | HL2, HL3 |
| 4 | 10uH 20A | L_Toroid_Vertical_L33.0mm_W17.8mm_P12.70mm_Pulse_KM-5 | L1, L2, L3, L4 |
| 1 | 100uH 2A | L_12x12mm_H8mm | L5 |
| 1 | 470uF 16V | CP_Radial_D8.0mm_P3.50mm | C1 |
| 10 | 0.1uF | C_0603_1608Metric | C2, C3, C10, C11, C26, C30, C36, C37 +2 |
| 4 | 0.033uF | C_0603_1608Metric | C4, C28, C29, C34 |
| 5 | 2200uF 63V | CP_Radial_D18.0mm_P7.50mm | C5, C6, C7, C8, C9 |
| 4 | 1uF 250V | C_Rect_L18.0mm_W9.0mm_P15.00mm_FKS3_FKP3 | C12, C21, C48, C49 |
| 2 | 1nF 100V | C_1206_3216Metric | C13, C22 |
| 2 | 10nF 100V | C_0805_2012Metric | C14, C23 |
| 9 | 1uF 100V | C_1210_3225Metric | C15, C16, C24, C25, C32, C50, C51, C52 +1 |
| 9 | 22uF 25V | C_1210_3225Metric | C17, C33, C39, C41, C42, C43, C44, C45 +1 |
| 4 | 1uF 16V | C_0603_1608Metric | C18, C19, C27, C31 |
| 1 | 0.047uF | C_0603_1608Metric | C20 |
| 1 | 3300pF | C_0603_1608Metric | C35 |
| 1 | 100pF | C_0603_1608Metric | C47 |
| 6 | 3.3 | R_1206_3216Metric | R1, R4, R5, R7, R11, R44 |
| 1 | 22k | R_0603_1608Metric | R2 |
| 11 | 10k | R_0603_1608Metric | R3, R6, R12, R13, R16, R18, R19, R31 +3 |
| 6 | 1k | R_0603_1608Metric | R8, R15, R20, R21, R28, R29 |
| 1 | 75k | R_0603_1608Metric | R9 |
| 2 | 100k | R_0603_1608Metric | R10, R25 |
| 4 | 4.7k | R_0603_1608Metric | R14, R17, R22, R45 |
| 3 | 100 | R_0603_1608Metric | R23, R24, R27 |
| 1 | 220k | R_0603_1608Metric | R26 |
| 1 | *** | R_0603_1608Metric | R30 |
| 6 | 1R | R_1812_4532Metric | R36, R37, R38, R39, R40, R41 |
| 1 | 20k | R_0805_2012Metric | R42 |
| 1 | 1M | R_0603_1608Metric | R47 |
Amp600w design files
The KiCad project lives in the mx-yah/amp600w repository on GitHub; these links point at the commit this page was built from.
- Layoutamp600w.kicad_pcb
Amp600w: common questions
How big is the Amp600w PCB?
The Amp600w measures 200 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Amp600w?
128 components, from 49 distinct parts. The full bill of materials is listed on this page.
Where can I download the Amp600w design files?
From the mx-yah/amp600w repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Amp600w design in my own project?
The repository has no license, so all rights stay with mx-yah. Use it as a reference, and ask the author before reusing the design.