Valgustugevuse mõõtmine fotodioodiga
n0ll0·skeemitehnika-projekt-2025·analog/kicad/scheme.kicad_pcb
About the Valgustugevuse mõõtmine fotodioodiga PCB
Valgustugevuse mõõtmine fotodioodiga is an open source PCB design by n0ll0, published on GitHub. It is a 2-layer board measuring 91 × 34.3 mm, with 26 components from 19 distinct parts.
Other key parts include the LM7805_TO220 and LM324. By type, the board carries 10 resistors, 6 diodes, 5 capacitors, 2 ICs, 1 battery holder and 1 fuse.
From the project
This repository contains the project files for the Skeemitehnika G11 course project "Arduino Nano digisisendi laiendus" & at TTÜ. The project involves designing and implementing an extension for the Arduino Nano to enhance its digital input capabilities.
Main components on the Valgustugevuse mõõtmine fotodioodiga
Valgustugevuse mõõtmine fotodioodiga bill of materials (BOM)
26 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805_TO220 | TO-220-3_Vertical | U1 |
| 1 | LM324 | DIP-14_W7.62mm_SMDSocket_SmallPads | U2 |
| 1 | Battery_Cell 9V | BatteryHolder_Eagle_12BH611-GR | BT1 |
| 1 | SMDH1206B005TF | R_1206_3216Metric | F1 |
| 1 | SW_NIDEC_CAS-120A1 SW_Nidec_CAS-120A1 | Nidec_Copal_CAS-120A | SW1 |
| 1 | BPW34 | Osram_DIL2_4.3x4.65mm_P5.08mm | D1 |
| 3 | LED | LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | D2, D3, D4 |
| 1 | LED | LED_0805_2012Metric | D5 |
| 1 | SMAJ13A | D_SMA | D6 |
| 1 | 22P 22p | C_0805_2012Metric | C1 |
| 1 | 1u | C_0805_2012Metric | C2 |
| 2 | 10U 10u | C_0805_2012Metric | C3, C4 |
| 1 | 100N 100n | C_0805_2012Metric | C5 |
| 1 | 220 | R_0805_2012Metric | R1 |
| 1 | 500K 500k | R_0805_2012Metric | R2 |
| 2 | 10K 10k | R_0805_2012Metric | R3, R6 |
| 1 | 14.7K 14.7k | R_0805_2012Metric | R4 |
| 1 | 5k | R_0805_2012Metric | R5 |
| 4 | 1k | R_0805_2012Metric | R7, R8, R9, R10 |
Valgustugevuse mõõtmine fotodioodiga design files
The KiCad project lives in the n0ll0/skeemitehnika-projekt-2025 repository on GitHub; these links point at the commit this page was built from.
Valgustugevuse mõõtmine fotodioodiga: common questions
How big is the Valgustugevuse mõõtmine fotodioodiga PCB?
The Valgustugevuse mõõtmine fotodioodiga measures 91 × 34.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Valgustugevuse mõõtmine fotodioodiga?
26 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Valgustugevuse mõõtmine fotodioodiga design files?
From the n0ll0/skeemitehnika-projekt-2025 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Valgustugevuse mõõtmine fotodioodiga design in my own project?
The repository has no license, so all rights stay with n0ll0. Use it as a reference, and ask the author before reusing the design.