OmnixieHAT v0 2
About the OmnixieHAT v0 2 PCB
OmnixieHAT v0 2 is an open source PCB design by NA-varez, published on GitHub under the MIT license. It is a 2-layer board measuring 91.4 × 55.9 mm, with 4 components from 4 distinct parts.
By type, the board carries 2 test points, 1 connector and 1 resistor.
It belongs with the displays & leds designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
Nixie driver board to enable easy inclusion of a Nixie tube into projects. One common driver board to support a wide range of Nixie Indicator Tubes
Initial sketches, ideas, original project intent was just a nixie clock. But I hated the feeling of desigingn a nixie clock with the nixie driver circuitry as single use for just a clock, when really you should be able to drive a nixie tube anywehere you'd like for displaying numbers. So that's where this inspiration came from
ALSO cnlohr's cnixxie. Particularly his MCU of choice ch32v003 and the accompanying library ch32v003fun and rv003usb inspired the digitally controlled flyback he uses in his design. Really in hopes of learning some skills he demonstrated in his youtube vide.
OmnixieHAT v0 2 bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IL-WX-16PB-VF-B-E1000E | IL-WX-16PB-VF-B-E1000E-PINS | J1 |
| 1 | 9 | PinHeader_1x01_P2.54mm_Vertical | TP1 |
| 1 | 1 | PinHeader_1x01_P2.54mm_Vertical | TP2 |
| 1 | R | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
OmnixieHAT v0 2 design files
The KiCad project lives in the NA-varez/OMNIXIE repository on GitHub; these links point at the commit this page was built from.
OmnixieHAT v0 2: common questions
How big is the OmnixieHAT v0 2 PCB?
The OmnixieHAT v0 2 measures 91.4 × 55.9 mm, has 2 copper layers and is 2.923 mm thick.
How many components are on the OmnixieHAT v0 2?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the OmnixieHAT v0 2 design files?
From the NA-varez/OMNIXIE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the OmnixieHAT v0 2 design in my own project?
Yes, under the terms of its MIT license, which NA-varez chose for the repository.
More boards in OMNIXIE
Earlier revisions in the repo: omnixieHAT_v0_1
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
Display eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k