HardLabs

Senior Design Project

NAIRA-MAN·DSAT-Avionics-Telemetry-PCB·Senior_Design_Project/Senior_Design_Project.kicad_pcb

Senior Design Project PCB layout, top view — open source STM32 board by NAIRA-MAN

About the Senior Design Project PCB

Senior Design Project is an open source STM32 PCB design by NAIRA-MAN, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 100.3 × 58.4 mm, with 16 components from 10 distinct parts.

Its main chip is the STM32F030C6Tx, from the STM32 family. Other key parts include the DAC08, ADC and Mixer. By type, the board carries 5 ICs, 3 capacitors, 2 crystals, 2 connectors and 2 inductors.

From the project

D.S.A.T Senior Design Project Project

Main components on the Senior Design Project

STM32F030C6TxDAC08ADCMixer

Senior Design Project bill of materials (BOM)

16 components, 10 distinct parts.

QtyPartRefs
1
STM32F030C6Tx
U1
1
DAC08
U2
1
ADC
U3
2
Mixer
U4, U5
2
VCO
X1, X2
1
Conn_01x02_Female
J1
1
SMA_Connector
J2
2
Duplexer
FL1, FL2
2
L
L1, L2
3
C
C1, C2, C3

Senior Design Project design files

The KiCad project lives in the NAIRA-MAN/DSAT-Avionics-Telemetry-PCB repository on GitHub; these links point at the commit this page was built from.

Senior Design Project: common questions

What microcontroller does the Senior Design Project use?

The Senior Design Project is built around the STM32F030C6Tx, from the STM32 family.

How big is the Senior Design Project PCB?

The Senior Design Project measures 100.3 × 58.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Senior Design Project?

16 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Senior Design Project design files?

From the NAIRA-MAN/DSAT-Avionics-Telemetry-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Senior Design Project design in my own project?

Yes, under the terms of its AGPL-3.0 license, which NAIRA-MAN chose for the repository.

Can I test firmware for the Senior Design Project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in DSAT-Avionics-Telemetry-PCB

Similar boards