2 open source boards using the ADC
Real designs built with the ADC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoDaq
SergioGasquez
165.1 × 110 mm76 parts2LMIT1
STM32Senior Design Project
NAIRA-MAN
100.3 × 58.4 mm16 parts2LAGPL-3.01
The ADC in open source designs
The gallery holds 2 open source boards using the ADC from 2 GitHub repositories; a typical one measures about 132.7 × 84.2 mm and carries around 46 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Daq by SergioGasquez.
Microcontrollers on boards using the ADC
ADC: common questions
Where can I find a ADC reference design?
Each of the 2 boards on this page is a real design using the ADC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ADC use?
Most are built on AVR/Arduino (1) and STM32 (1).
How big is a typical board using the ADC?
The median is 132.7 × 84.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the ADC?
By GitHub stars, Daq by SergioGasquez, with 1 stars.
Can I simulate one of these boards using the ADC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.