Kicad-Hardware-Design
About the Kicad-Hardware-Design PCB
Kicad-Hardware-Design is an open source PCB design by NaraenderHardware, published on GitHub under the MIT license. It is a 2-layer board measuring 95 × 33.5 mm, with 12 components from 9 distinct parts.
Other key parts include the L7805. By type, the board carries 5 diodes, 3 capacitors, 2 connectors, 1 IC and 1 resistor.
From the project
PCB design, circuit development, and manufacturing engineering project files.
Design Type: Linear DC Power Supply (Through-Hole) CAD Tool: KiCad 9 Status: Schematic and PCB layout complete; static geometry checks clean; native KiCad ERC/DRC and complete drill files pending
In this project, I designed a 5V DC regulated linear power supply using through-hole technology (THT). The board converts an AC input from a step-down transformer or an unregulated DC input into a stable +5V DC rail suitable for breadboards, logic ICs, or microcontroller circuits.
Main components on the Kicad-Hardware-Design
Kicad-Hardware-Design bill of materials (BOM)
12 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | TO-220-3_Vertical | U1 |
| 1 | CONN_01X03 Conn_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | CONN_01X02 Conn_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 4 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 1 | LED | LED_D5.0mm_FlatTop | D5 |
| 1 | C_Polarized | CP_Radial_D12.5mm_P5.00mm | C1 |
| 1 | C | C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 1 | C_Polarized | CP_Radial_D8.0mm_P5.00mm | C3 |
| 1 | R | R_Axial_DIN0411_L9.9mm_D3.6mm_P20.32mm_Horizontal | R1 |
Kicad-Hardware-Design design files
The KiCad project lives in the NaraenderHardware/pcb-design-manufacturing-engineering repository on GitHub; these links point at the commit this page was built from.
Kicad-Hardware-Design: common questions
How big is the Kicad-Hardware-Design PCB?
The Kicad-Hardware-Design measures 95 × 33.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicad-Hardware-Design?
12 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kicad-Hardware-Design design files?
From the NaraenderHardware/pcb-design-manufacturing-engineering repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kicad-Hardware-Design design in my own project?
Yes, under the terms of its MIT license, which NaraenderHardware chose for the repository.
