Control board v2

ncku-formula-racing·circuit·control-board-v2/control-board-v2.kicad_pcb

About the Control board v2

Control board v2 is an open source STM32 PCB design by ncku-formula-racing, published on GitHub. It is a 2-layer board measuring 95 × 50 mm, with 124 components from 41 distinct parts.

Its main chip is the STM32H563RGTx, from the STM32 family. Other key parts include the ISO1042-Q1, NEO-XM, TCAN1462VDRQ1, SCT01F24S05 and AMS1117-3.3. By type, the board carries 36 capacitors, 29 resistors, 25 connectors, 17 diodes, 7 ICs and 5 test points.

From the project

A monorepo of circuit boards

Main components on the Control board v2

ISO1042-Q1 NEO-XM TCAN1462VDRQ1 SCT01F24S05 STM32H563RGTx AMS1117-3.3 AP63200WU

Control board v2 bill of materials (BOM)

124 components, 41 distinct parts.

Qty	Part	Footprint	Refs
1	ISO1042-Q1	SOIC-8_3.9x4.9mm_P1.27mm	U1
1	NEO-XM	ublox_NEO	U2
1	TCAN1462VDRQ1	SOIC-8_3.9x4.9mm_P1.27mm	U3
1	SCT01F24S05	Converter_DCDC_TRACO_TME_24xxS_Single_THT	U4
1	STM32H563RGTx	LQFP-64_10x10mm_P0.5mm	U5
1	AMS1117-3.3	SOT-223-3_TabPin2	U6
1	AP63200WU	TSOT-23-6	U8
1	25M	Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm	Y1
1	Conn_01x03	PinHeader_1x03_P2.54mm_Vertical	J1
1	GPS_ANT	SMA_Amphenol_901-143_Horizontal	J2
17	Conn_01x01_Pin	PinHeader_1x01_P2.54mm_Vertical	J3, J5, J7, J12, J13, J15, J19, J20 +9
1	Micro_SD_Card_Det1	microSD_HC_Molex_47219-2001	J4
1	USB_C_Receptacle_USB2.0_16P	USB_C_Receptacle_HRO_TYPE-C-31-M-12	J6
4	Conn_01x02	PinHeader_1x02_P2.54mm_Vertical	J14, J16, J17, J18
2	Jumper_2_Open	TestPoint_2Pads_Pitch2.54mm_Drill0.8mm	JP1, JP3
1	TP_5V	TestPoint_THTPad_D1.5mm_Drill0.7mm	TP1
1	TP_3V3	TestPoint_THTPad_D1.5mm_Drill0.7mm	TP2
1	TP_24V	TestPoint_THTPad_D1.5mm_Drill0.7mm	TP3
1	TP_rst	TestPoint_THTPad_D1.5mm_Drill0.7mm	TP4
1	TP_iso5V	TestPoint_THTPad_D1.5mm_Drill0.7mm	TP5

Show 21 more

Qty	Part	Footprint	Refs
8	BAT46W-7-F	SOD3715X145N	D1, D11, D15, D16, D17, D18, D19, D20
6	LED	LED_0805_2012Metric	D3, D4, D6, D7, D9, D12
2	DESD2CAN2SOQ	TSOT-23	D5, D10
1	BAT46	D_SOD-123	D8
1	22u	L_0805_2012Metric	L1
1	10uH	L_Coilcraft_XAL6060-XXX	L2
2	20p	C_0603_1608Metric	C1, C2
1	4u7	C_0805_2012Metric	C3
2	2u2	C_0805_2012Metric	C4, C5
15	100n	C_0603_1608Metric	C6, C7, C8, C9, C10, C11, C13, C14 +7
9	1u	C_0805_2012Metric	C12, C16, C21, C23, C24, C25, C29, C33 +1
4	10u	C_0805_2012Metric	C15, C19, C32, C38
1	12p	C_0603_1608Metric	C27
2	22u	C_0805_2012Metric	C30, C31
12	10k	R_0603_1608Metric	R1, R5, R6, R8, R9, R15, R16, R19 +4
4	60R	R_0603_1608Metric	R2, R3, R17, R18
1	22	R_0603_1608Metric	R4
8	330R	R_0603_1608Metric	R7, R10, R11, R12, R22, R23, R24, R25
2	5k1	R_0603_1608Metric	R13, R14
1	157k	R_0603_1608Metric	R20
1	30k1	R_0603_1608Metric	R21

Control board v2 design files

The KiCad project lives in the ncku-formula-racing/circuit repository on GitHub; these links point at the commit this page was built from.

Layoutcontrol-board-v2/control-board-v2.kicad_pcb
Schematiccontrol-board-v2/control-board-v2.kicad_sch

Control board v2: common questions

What microcontroller does the Control board v2 use?

The Control board v2 is built around the STM32H563RGTx, from the STM32 family.

How big is the Control board v2?

The Control board v2 measures 95 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Control board v2?

124 components, from 41 distinct parts. The full bill of materials is listed on this page.

Where can I download the Control board v2 design files?

From the ncku-formula-racing/circuit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.