Isouart4
nedko·isouart4
About the Isouart4 PCB
Isouart4 is an open source PCB design by nedko, published on GitHub. It is a 2-layer board measuring 89 × 99 mm, with 81 components from 20 distinct parts.
Other key parts include the LP2950CDT-3.3, π122U31, CH344Q and 74HC123. By type, the board carries 31 capacitors, 24 resistors, 10 ICs, 6 diodes, 5 connectors and 3 inductors.
Main components on the Isouart4
Isouart4 bill of materials (BOM)
81 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LP2950CDT-3.3 | TO-252-2 | U1 |
| 4 | π122U31 | SOIC-8_3.9x4.9mm_P1.27mm | U2, U3, U4, U5 |
| 1 | CH344Q | LQFP-48_7x7mm_P0.5mm | U7 |
| 4 | 74HC123 | SOIC-16_3.9x9.9mm_P1.27mm | U8, U9, U10, U11 |
| 1 | 8MHz | Crystal_SMD_7050-4Pin_7.0x5.0mm | Y1 |
| 1 | USB_B | USB_B_TE_5787834_Vertical | J1 |
| 4 | Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2, J3, J4, J5 |
| 1 | 100mA | FuseX | F1 |
| 6 | LED_Dual_KAK | LED_D5.0mm-3 | D1, D2, D3, D4, D5, D6 |
| 3 | 100R | FB_0805_2012Metric | FB1, FB2, FB3 |
| 3 | 2.2uF | CP_EIA-3528-15_AVX-H_Pad1.50x2.35mm_HandSolder | C1, C4, C32 |
| 12 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C6, C7, C8, C9, C10, C13 +4 |
| 2 | 4n7 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C12 |
| 4 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C15, C16, C17 |
| 2 | 22p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18, C19 |
| 8 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20, C21, C23, C24, C26, C27, C29, C30 |
| 3 | 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R4 |
| 1 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 12 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8, R12, R13, R16, R17 +4 |
| 8 | 220k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R14, R15, R18, R19, R22, R23 |
Isouart4 design files
The KiCad project lives in the nedko/isouart4 repository on GitHub; these links point at the commit this page was built from.
- Layoutisouart4.kicad_pcb
- Schematicisouart4.kicad_sch
Isouart4: common questions
How big is the Isouart4 PCB?
The Isouart4 measures 89 × 99 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Isouart4?
81 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Isouart4 design files?
From the nedko/isouart4 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Isouart4 design in my own project?
The repository has no license, so all rights stay with nedko. Use it as a reference, and ask the author before reusing the design.