MM-Plus-RE
NeilKhera·Random-PCBs·MM-Plus-RE/MM-Plus-RE.kicad_pcb
About the MM-Plus-RE PCB
MM-Plus-RE is an open source PCB design by NeilKhera, published on GitHub. It is a 2-layer board measuring 73.7 × 103 mm, with 245 components from 60 distinct parts.
Other key parts include the UDT26A05L05UL, LM4890, ALPU-FA, PT4103E and W25Q128JVS. By type, the board carries 98 resistors, 84 capacitors, 9 switches, 8 ICs, 6 diodes and 6 inductors.
From the project
A backup of random PCB projects. In various states of completion
Main components on the MM-Plus-RE
MM-Plus-RE bill of materials (BOM)
245 components, 60 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | UDT26A05L05UL | SOT-23-6 | U1, U2 |
| 1 | LM4890 | VSSOP-8_3.0x3.0mm_P0.65mm | U3 |
| 1 | ALPU-FA | SOT-23-6 | U4 |
| 1 | PT4103E | SOT-23-6 | U5 |
| 1 | W25Q128JVS | SOIC-8_5.275x5.275mm_P1.27mm | U6 |
| 1 | SSD202D | SSD202D | U7 |
| 1 | AXP223 | QFN-68-1EP_8x8mm_P0.4mm_EP5.2x5.2mm | U8 |
| 1 | SW3? | ABXY-Button | A1 |
| 2 | MMBT3904 | TSOT-23 | Q1, Q2 |
| 1 | AO3401A | TSOT-23 | Q3 |
| 2 | SW3? | ABXY-Button | X1, Y1 |
| 1 | PinHeader_1x04_P2.54mm | PinHeader_1x04_P2.54mm_Vertical | CON1 |
| 1 | PJ327F | PJ327F | J301 |
| 1 | SW3? | ABXY-Button | B1 |
| 1 | Molex_PicoBlade_53261-0271 | Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | BAT2 |
| 1 | TSOT-23 | TSOT-23 | DNF1 |
| 10 | R | R_0402_1005Metric | DNF2, DNF3, DNF4, DNF5, DNF6, DNF7, DNF8, DNF9 +2 |
| 2 | SW4? | DPAD-Button1 | DOWN1, UP1 |
| 1 | Hirose_FH12-20S-0.5SH_1x20-1MP_P0.50mm_Horizontal | Hirose_FH12-20S-0.5SH_1x20-1MP_P0.50mm_Horizontal | LCD1 |
| 2 | SW4? | DPAD-Button2 | LEFT1, RIGHT1 |
Show 40 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | SW1? | SW_Push_1P1T_XKB_TS-1187A | MODE1, SELECT1, START1 |
| 1 | Motor | Motor | MOTOR1 |
| 3 | SKRTLAE010 | SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 | PWRON1, VOL+1, VOL-1 |
| 1 | Speaker | Speaker | SPK1 |
| 4 | SW2? | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW-L1, SW-L2, SW-R1, SW-R2 |
| 1 | GCT_MEM2075-00-140-01-A | GCT_MEM2075-00-140-01-A | TF1 |
| 1 | USB-C Receptacle | USB_C_Receptacle_GCT_USB4110 | USB1 |
| 1 | BL-M8188FU3 | BL-M8188FU3 | WIFI1 |
| 1 | 24MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | XTAL1 |
| 1 | 32.768KHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | XTAL2 |
| 1 | Blue | LED_0603_1608Metric | D1 |
| 1 | Red | LED_0603_1608Metric | D2 |
| 1 | Green | LED_0603_1608Metric | D3 |
| 3 | 1N5819W | D_SOD-123F | D4, D5, D6 |
| 5 | 1.5uH | TYA2016108R2M10 | L1, L2, L3, L4, L5 |
| 1 | TYA2016108R2M10 | TYA2016108R2M10 | L6 |
| 39 | 0.1uF | C_0402_1005Metric | C1, C10, C11, C13, C14, C20, C21, C22 +31 |
| 27 | 10uF | C_0603_1608Metric | C2, C3, C4, C6, C7, C12, C15, C26 +19 |
| 4 | 1uF | C_0603_1608Metric | C5, C8, C9, C47 |
| 4 | ?uF | C_0402_1005Metric | C16, C17, C18, C19 |
| 1 | 0.47uF | C_0402_1005Metric | C23 |
| 2 | 22uF | C_0603_1608Metric | C27, C71 |
| 1 | 1uF | C_0402_1005Metric | C31 |
| 1 | 10nF | C_0402_1005Metric | C34 |
| 5 | 4.7uF | C_0603_1608Metric | C39, C40, C77, C78, C82 |
| 4 | 2K | R_0402_1005Metric | R1, R2, R3, R91 |
| 5 | 1K | R_0402_1005Metric | R4, R7, R19, R37, R84 |
| 3 | 100K | R_0402_1005Metric | R5, R18, R54 |
| 11 | 0R | R_0402_1005Metric | R6, R9, R10, R13, R16, R33, R35, R36 +3 |
| 27 | 10K | R_0402_1005Metric | R8, R14, R23, R24, R27, R29, R30, R34 +19 |
| 2 | 10m | R_0805_2012Metric | R11, R12 |
| 24 | 47R | R_0402_1005Metric | R15, R22, R25, R26, R28, R31, R42, R59 +16 |
| 3 | 0R | R_0603_1608Metric | R17, R32, R86 |
| 7 | 4.7K | R_0402_1005Metric | R20, R21, R46, R47, R48, R49, R96 |
| 3 | 10R | R_0402_1005Metric | R39, R40, R81 |
| 4 | 100R | R_0402_1005Metric | R43, R44, R50, R53 |
| 1 | 22K | R_0402_1005Metric | R58 |
| 1 | 3.3K | R_0402_1005Metric | R82 |
| 1 | 47K | R_0402_1005Metric | R87 |
| 2 | 5.1K | R_0402_1005Metric | R97, R98 |
MM-Plus-RE design files
The KiCad project lives in the NeilKhera/Random-PCBs repository on GitHub; these links point at the commit this page was built from.
MM-Plus-RE: common questions
How big is the MM-Plus-RE PCB?
The MM-Plus-RE measures 73.7 × 103 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MM-Plus-RE?
245 components, from 60 distinct parts. The full bill of materials is listed on this page.
Where can I download the MM-Plus-RE design files?
From the NeilKhera/Random-PCBs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MM-Plus-RE design in my own project?
The repository has no license, so all rights stay with NeilKhera. Use it as a reference, and ask the author before reusing the design.