722 open source boards using the W25Q128JVS

Real designs built with the W25Q128JVS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

722 boardsClear filters|Most starred

How designs wire the W25Q128JVS

Read from the KiCad layouts of 550 open source designs, one per repository: what each pin of the W25Q128JVS connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 452 of 545 designs, most often 100 nF (then 1 µF).
  • The CS pin has a series resistor on 363 of 550 designs, most often 1 kΩ (then 0 Ω).
  • The CS pin has a pull-up to 3.3V on 268 of 550 designs, most often 10 kΩ (then 4.7 kΩ).
CSpin 1Connected to: The microcontroller 82%
  • Series resistor on 66% · 1 kΩ (307), 0 Ω (37), 5.1 kΩ (14)
  • Pull-up to 3.3V on 49% · 10 kΩ (163), 4.7 kΩ (11), 100 kΩ (5)
GNDpin 4Connected to: GND 97%
VCCpin 8Connected to: 3.3V 93%
  • Decoupling capacitor on 83% · 100 nF (667), 1 µF (54), 10 µF (42)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Main by google, OpenDeck r3.1.2 by shanteacontrols, Icepi zero by cheyao and PicoGUS chipdown by polpo.

The W25Q128JVS in open source designs

The gallery holds 722 open source boards using the W25Q128JVS from 561 GitHub repositories; a typical one measures about 72 × 68.8 mm and carries around 80 components.

57% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is Main by google.

Microcontrollers on boards using the W25Q128JVS

W25Q128JVS: common questions

Where can I find a W25Q128JVS reference design?

Each of the 722 boards on this page is a real design using the W25Q128JVS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the W25Q128JVS VCC pin?

The VCC pin has a decoupling capacitor on 452 of 545 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 550 open source designs using the W25Q128JVS.

What resistor goes on the W25Q128JVS CS pin?

The CS pin has a series resistor on 363 of 550 designs, most often 1 kΩ (then 0 Ω). Counted from the KiCad layouts of 550 open source designs using the W25Q128JVS.

What parts are used alongside the W25Q128JVS?

The RP2040, AMS1117-3.3, USBLC6-2SC6, NCP1117-3.3_SOT223 and SRV05-4 appear in the most repositories here.

Which microcontrollers do boards using the W25Q128JVS use?

Most are built on RP2040/RP2350 (524), STM32 (79), ESP32 (58) and FPGA (18).

How big is a typical board using the W25Q128JVS?

The median is 72 × 68.8 mm, and 57% are two-layer designs.

What is the most popular open source board using the W25Q128JVS?

By GitHub stars, Main by google, with 2,945 stars.

Can I simulate one of these boards using the W25Q128JVS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part