HardLabs

Programator

Nesta2008·myshm·Programator/Programator.kicad_pcb

Programator PCB layout, top view — open source AVR/Arduino board by Nesta2008

About the Programator PCB

Programator is an open source AVR/Arduino PCB design by Nesta2008, published on GitHub. It is a 2-layer board measuring 194 × 139 mm, with 53 components from 17 distinct parts.

Its main chip is the ATtiny2313A-PU, from the AVR/Arduino family. By type, the board carries 19 resistors, 10 capacitors, 6 crystals, 6 LEDs and 1 connector.

Programator bill of materials (BOM)

53 components, 17 distinct parts.

QtyPartRefs
2
CONN_2
X1, X3
2
CONN_2
X2, X4
2
CONN_6
X6, X9
1
USB_A
J1
3
ATtiny2313A-PU
DA1, DA2, DA3
3
КД510А
VD1, VD2, VD3
2
BZX55C3V6
VD8, VD9
1
16 МГц
ZQ1
2
12 МГц
ZQ2, ZQ3
6
LED
VD4, VD5, VD6, VD7, VD10, VD11
6
30 пФ
C1, C2, C4, C5, C8, C9
4
0.15
C3, C6, C7, C10
7
1k
R1, R2, R3, R5, R6, R7, R8
1
10k
R4
6
510
R9, R10, R11, R12, R16, R17
3
1.5k
R13, R18, R19
2
27
R14, R15

Programator design files

The KiCad project lives in the Nesta2008/myshm repository on GitHub; these links point at the commit this page was built from.

Programator: common questions

What microcontroller does the Programator use?

The Programator is built around the ATtiny2313A-PU, from the AVR/Arduino family.

How big is the Programator PCB?

The Programator measures 194 × 139 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Programator?

53 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Programator design files?

From the Nesta2008/myshm repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Programator design in my own project?

The repository has no license, so all rights stay with Nesta2008. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Programator without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in myshm

Similar boards