NeuroBytes Cochlea
NeuroTinker·NeuroBytes_Cochlea·HARDWARE/NeuroBytes_Cochlea.kicad_pcb
About the NeuroBytes Cochlea PCB
NeuroBytes Cochlea is an open source STM32 PCB design by NeuroTinker, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 52.3 × 46.5 mm, with 49 components from 20 distinct parts.
Its main chip is the STM32F410CBU6, from the STM32 family. Other key parts include the Knowles_SPU0410, MCP6001 and AP2112K-3.3. By type, the board carries 16 capacitors, 13 resistors, 7 connectors, 6 diodes, 4 ICs and 2 switches.
From the project
12-bit audio in ADC max sampling 15 kHz 1024 buckets 50 Hz update
Main components on the NeuroBytes Cochlea
NeuroBytes Cochlea bill of materials (BOM)
49 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Knowles_SPU0410 | ZF_SENSOR_Knowles_SPU410 | U1 |
| 1 | MCP6001 | ZF_SOT23-5L | U2 |
| 1 | AP2112K-3.3 | ZF_SOT23-5L | U3 |
| 1 | STM32F410CBU6 | ZF_IC_UFQFPN48 | U4 |
| 6 | JST_GH_4-pos | ZF_CONN_JST_GH | P1, P2, P3, P4, P5, P6 |
| 1 | JST_GH_7-pos | ZF_CONN_JST_GH_7POS | P7 |
| 1 | SW_ID | ZF_SW_Momentary_SideMtg | SW1 |
| 1 | SW_EARDRUM | ZF_SW_Momentary_Snap-Action_side-mtg | SW2 |
| 6 | LED | ZF_SMD_NonPol_0402 | D1, D2, D3, D4, D5, D6 |
| 1 | Ferrite_Bead_Small | ZF_SMD_NonPol_0603 | L1 |
| 5 | 1u0 | ZF_SMD_NonPol_0603 | C1, C3, C6, C7, C10 |
| 2 | 10u | ZF_SMD_NonPol_0603 | C2, C4 |
| 5 | 0u1 | ZF_SMD_NonPol_0402 | C5, C9, C11, C12, C13 |
| 2 | 4u7 | ZF_SMD_NonPol_0603 | C8, C14 |
| 2 | C | ZF_SMD_NonPol_0402 | C15, C16 |
| 3 | 10k | ZF_SMD_NonPol_0402 | R1, R2, R12 |
| 1 | 5k | ZF_SMD_NonPol_0402 | R3 |
| 1 | 100k | ZF_SMD_NonPol_0402 | R4 |
| 6 | R | ZF_SMD_NonPol_0402 | R6, R7, R8, R9, R10, R11 |
| 2 | JMP | ZF_SMD_NonPol_0402 | R13, R14 |
NeuroBytes Cochlea design files
The KiCad project lives in the NeuroTinker/NeuroBytes_Cochlea repository on GitHub; these links point at the commit this page was built from.
NeuroBytes Cochlea: common questions
What microcontroller does the NeuroBytes Cochlea use?
The NeuroBytes Cochlea is built around the STM32F410CBU6, from the STM32 family.
How big is the NeuroBytes Cochlea PCB?
The NeuroBytes Cochlea measures 52.3 × 46.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NeuroBytes Cochlea?
49 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the NeuroBytes Cochlea design files?
From the NeuroTinker/NeuroBytes_Cochlea repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the NeuroBytes Cochlea design in my own project?
Yes, under the terms of its GPL-3.0 license, which NeuroTinker chose for the repository.
Can I test firmware for the NeuroBytes Cochlea without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k