Multichannel mixer unrouted
About the Multichannel mixer unrouted PCB
Multichannel mixer unrouted is an open source PCB design by nickradfc, published on GitHub. It is a 2-layer board measuring 110 × 111 mm, with 114 components from 10 distinct parts.
Other key parts include the TL072CD. By type, the board carries 47 resistors, 40 capacitors, 6 connectors and 5 ICs.
Main components on the Multichannel mixer unrouted
Multichannel mixer unrouted bill of materials (BOM)
114 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | TL072CD TEXAS INSTRUMENTS | SOIC127P600X175-8N | IC1, IC2, IC3, IC4, IC5 |
| 5 | CH1 | Jack_6.35mm_Neutrik_NMJ6HCD2_Horizontal | J1, J6, J7, J8, J9 |
| 1 | CLIFF_FC68148(DC-10A) Power CLIFF ELECTRONIC COMPONENTS | CLIFF_FC68148(DC-10A) | J5 |
| 4 | Mid | Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV5, RV9, RV13 |
| 4 | Bass | Potentiometer_Alps_RK09K_Single_Vertical | RV2, RV6, RV10, RV14 |
| 4 | Treble | Potentiometer_Alps_RK09K_Single_Vertical | RV3, RV7, RV11, RV15 |
| 4 | Volume | Potentiometer_Alps_RK09K_Single_Vertical | RV4, RV8, RV12, RV16 |
| 11 | CTEB_2.2UF_35V_10%_254-500X840 KEMET | CAPPRB254-500X840 | C1, C2, C4, C5, C13, C14, C22, C23 +3 |
| 29 | CC1206_100NF_50V_10%_X7R GENERIC | CAPC3216X140N | C3, C6, C7, C8, C9, C10, C11, C12 +21 |
| 47 | R1206_10K_1%_0.25W_100PPM GENERIC | RESC3216X65N | R1, R2, R3, R4, R5, R6, R7, R8 +39 |
Multichannel mixer unrouted design files
The KiCad project lives in the nickradfc/kicad-demo-projects repository on GitHub; these links point at the commit this page was built from.
Multichannel mixer unrouted: common questions
How big is the Multichannel mixer unrouted PCB?
The Multichannel mixer unrouted measures 110 × 111 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Multichannel mixer unrouted?
114 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Multichannel mixer unrouted design files?
From the nickradfc/kicad-demo-projects repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Multichannel mixer unrouted design in my own project?
The repository has no license, so all rights stay with nickradfc. Use it as a reference, and ask the author before reusing the design.
More boards in kicad-demo-projects
KiCad demo
312 × 106.7 mm185 parts4LNo license0
Kit dev coldfire xilinx 5213
157.5 × 91.4 mm157 parts4LNo license0
RP2040/RP2350TinyTapeout 4+ Demoboard
104.5 × 81 mm131 parts4LNo license0
Multichannel mixer
110 × 111 mm114 parts2LNo license0
StickHub
16.5 × 40 mm89 parts2LNo license0
Actionneur piezo
100.7 × 80 mm68 parts2LNo license0
PICFlat hierarchy
160 × 99.1 mm57 parts2LNo license0
PICPic programmer
160 × 99.1 mm55 parts2LNo license0
CARTE TEST XILINX XC95108
101.6 × 99.7 mm40 parts2LNo license0
Interf u
115.6 × 108.2 mm23 parts2LNo license0