Interf u
About the Interf u PCB
Interf u is an open source PCB design by nickradfc, published on GitHub. It is a 2-layer board measuring 115.6 × 108.2 mm, with 23 components from 17 distinct parts.
Other key parts include the 74LS245, 74LS688, 74LS541, 628128 and EP600. By type, the board carries 6 ICs, 6 capacitors, 5 resistors, 2 diodes, 1 crystal and 1 jumper.
Main components on the Interf u
Interf u bill of materials (BOM)
23 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS245 | DIP-20_W7.62mm | U1 |
| 1 | 74LS688 | DIP-20_W7.62mm | U2 |
| 1 | 74LS541 | DIP-20_W7.62mm | U3 |
| 1 | 628128 | DIP-32_W15.24mm | U5 |
| 1 | EP600 | DIP-24_W7.62mm | U8 |
| 1 | 4003APG120 | PGA120 | U9 |
| 1 | 8MHz | Crystal_HC18-U_Horizontal | X1 |
| 1 | BUSPC | BUS_PC | BUS1 |
| 1 | CONN_8X2 | PinHeader_2x08_P2.54mm_Vertical | JP1 |
| 1 | 9x1K | R_Array_SIP10 | RR1 |
| 2 | LED | LED_D5.0mm | D1, D2 |
| 4 | 47uF | CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C1, C4, C5, C6 |
| 2 | 47pF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C2, C3 |
| 1 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 2 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5 |
Interf u design files
The KiCad project lives in the nickradfc/kicad-demo-projects repository on GitHub; these links point at the commit this page was built from.
- Layoutinterf_u/interf_u.kicad_pcb
- Schematicinterf_u/interf_u.kicad_sch
Interf u: common questions
How big is the Interf u PCB?
The Interf u measures 115.6 × 108.2 mm, has 2 copper layers and is 1.6002 mm thick.
How many components are on the Interf u?
23 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Interf u design files?
From the nickradfc/kicad-demo-projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Interf u design in my own project?
The repository has no license, so all rights stay with nickradfc. Use it as a reference, and ask the author before reusing the design.
More boards in kicad-demo-projects
KiCad demo
312 × 106.7 mm185 parts4LNo license0
Kit dev coldfire xilinx 5213
157.5 × 91.4 mm157 parts4LNo license0
RP2040/RP2350TinyTapeout 4+ Demoboard
104.5 × 81 mm131 parts4LNo license0
Multichannel mixer unrouted
110 × 111 mm114 parts2LNo license0
Multichannel mixer
110 × 111 mm114 parts2LNo license0
StickHub
16.5 × 40 mm89 parts2LNo license0
Actionneur piezo
100.7 × 80 mm68 parts2LNo license0
PICFlat hierarchy
160 × 99.1 mm57 parts2LNo license0
PICPic programmer
160 × 99.1 mm55 parts2LNo license0
CARTE TEST XILINX XC95108
101.6 × 99.7 mm40 parts2LNo license0