HardLabs

AFFECTS

nicoguich·AFFECTS·pcb_rasp_teensy/pcb_rasp_tennsy/pcb_rasp_tennsy.kicad_sch

This repository ships a schematic but no board layout.

About the AFFECTS PCB

AFFECTS is an open source NXP PCB design by nicoguich, published on GitHub. It is a board, with 2 components from 2 distinct parts.

Its main chip is the Teensy4.0, from the NXP family. By type, the board carries 1 IC and 1 connector.

Main components on the AFFECTS

Teensy4.0

AFFECTS bill of materials (BOM)

2 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Teensy4.0
U1
1
Raspberry_Pi_4
J1

AFFECTS design files

The KiCad project lives in the nicoguich/AFFECTS repository on GitHub; these links point at the commit this page was built from.

AFFECTS: common questions

What microcontroller does the AFFECTS use?

The AFFECTS is built around the Teensy4.0, from the NXP family.

How many components are on the AFFECTS?

2 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AFFECTS design files?

From the nicoguich/AFFECTS repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the AFFECTS design in my own project?

The repository has no license, so all rights stay with nicoguich. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the AFFECTS without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

Similar boards