Blinking-LED-Documentation
nizarbadriali·Blinking-LED-Documentation·kicad/LED_Blinker.kicad_pcb
About the Blinking-LED-Documentation PCB
Blinking-LED-Documentation is an open source PCB design by nizarbadriali, published on GitHub under the MIT license. It is a 2-layer board measuring 51 × 30.5 mm, with 9 components from 8 distinct parts.
Other key parts include the ICM7555xP. By type, the board carries 3 capacitors, 3 resistors, 1 IC, 1 connector and 1 diode.
From the project
Documenting a LED Blinker PCB
Status: Schematic and PCB layout designed in KiCad. SPICE simulation, ERC/DRC results, manufacturing export, assembly, and bench testing are not yet documented here. Timing figures below are calculated from the standard 555 astable equations, not measured.
A free-running LED blinker built around an ICM7555xP (CMOS 555 timer) wired as an astable oscillator. R1, R2 and C1 set the blink rate; the timer output (pin 3) drives a red LED through a 330 Ω current-limiting resistor. It is the follow-up to the LED-PCB-Documentation project, adding an active timing circuit to the simple resistor + LED…

Main components on the Blinking-LED-Documentation
Blinking-LED-Documentation bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ICM7555xP | DIP-8_W7.62mm | U1 |
| 1 | Conn_01x02_MountingPin | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 10µF | CP_Radial_D5.0mm_P2.00mm | C1 |
| 2 | 100nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C2, C3 |
| 1 | 10kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 470kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 330Ω | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
Blinking-LED-Documentation design files
The KiCad project lives in the nizarbadriali/Blinking-LED-Documentation repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/LED_Blinker.kicad_pcb
- Schematickicad/LED_Blinker.kicad_sch
Blinking-LED-Documentation: common questions
How big is the Blinking-LED-Documentation PCB?
The Blinking-LED-Documentation measures 51 × 30.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Blinking-LED-Documentation?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Blinking-LED-Documentation design files?
From the nizarbadriali/Blinking-LED-Documentation repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Blinking-LED-Documentation design in my own project?
Yes, under the terms of its MIT license, which nizarbadriali chose for the repository.