Stm32
npgo22·stm32_kicad·stm32/stm32.kicad_pcb
About the Stm32 PCB
Stm32 is an open source STM32 PCB design by npgo22, published on GitHub. It is a 2-layer board measuring 44 × 36 mm, with 35 components from 18 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 15 capacitors, 8 resistors, 4 connectors, 2 ICs, 2 switches and 2 inductors.
From the project
Hardware and software for a modified follow-along of KiCad 6 STM32 PCB Design Full Tutorial - Phil's Lab #65
Main components on the Stm32
Stm32 bill of materials (BOM)
35 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | 16MHZ 16mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 3 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1, J2, J3 |
| 1 | TYPE-C-31-M-12 | HRO_TYPE-C-31-M-12 | J4 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW2 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 2 | 120R | L_0603_1608Metric | FB1, FB2 |
| 2 | 1u | C_0402_1005Metric | C1, C8 |
| 1 | 10U 10u | C_0603_1608Metric | C2 |
| 7 | 100N 100n | C_0402_1005Metric | C3, C4, C5, C6, C7, C9, C13 |
| 2 | 10P 10p | C_0402_1005Metric | C10, C11 |
| 1 | 10N 10n | C_0402_1005Metric | C12 |
| 2 | 22U 22u | C_0805_2012Metric | C14, C15 |
| 2 | 10K | R_0402_1005Metric | R1, R2 |
| 4 | 1K5 1k5 | R_0402_1005Metric | R3, R5, R6, R7 |
| 2 | 5K1 5k1 | R_0402_1005Metric | R8, R9 |
Stm32 design files
The KiCad project lives in the npgo22/stm32_kicad repository on GitHub; these links point at the commit this page was built from.
Stm32: common questions
What microcontroller does the Stm32 use?
The Stm32 is built around the STM32F103C8T6, from the STM32 family.
How big is the Stm32 PCB?
The Stm32 measures 44 × 36 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stm32?
35 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stm32 design files?
From the npgo22/stm32_kicad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stm32 design in my own project?
The repository has no license, so all rights stay with npgo22. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k