Vbus converter mezzanine
About the Vbus converter mezzanine PCB
Vbus converter mezzanine is an open source PCB design by o16s, published on GitHub. It is a 2-layer board measuring 10.9 × 29.2 mm, with 17 components from 15 distinct parts.
Other key parts include the TLP291. By type, the board carries 6 capacitors, 4 resistors, 2 ICs, 2 diodes, 2 inductors and 1 connector.
From the project
Order the PCB here: https://aisler.net/p/FNEDYBJE
Main components on the Vbus converter mezzanine
Vbus converter mezzanine bill of materials (BOM)
17 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TLP291 LMR14006Y | SOT-23-6 | U1, U2 |
| 1 | 68015-206HLF Conn_02x05_Odd_Even | Pin_Header_Straight_2x05_Pitch2.54mm_SMD | J1 |
| 1 | FM4004-W 30V,1A | D_SOD-123 | D1 |
| 1 | BZX84C8V2LT1G 30V,1A | D_SOD-123 | D2 |
| 1 | MLZ2012M100WT000 10uH,Ferrite,2A | L_Bourns-SRU8043 | L1 |
| 1 | 10uH,Ferrite,2A | L_Bourns-SRU8043 | L2 |
| 1 | EMZA350ADA101MF80G Cboot,0.1u | C_0603 | C1 |
| 1 | EMZA350ADA101MF80G Cin,2.2u | C_1206 | C2 |
| 1 | Cout,22u | C_0603 | C3 |
| 1 | Cboot,0.1u | C_0603 | C4 |
| 1 | 885012206095 Cin,2.2u | C_1206 | C5 |
| 1 | 885012206095 Cout,22u | C_0603 | C6 |
| 1 | RC0603JR-073K6L R1,33k | R_0603 | R1 |
| 2 | RC0603JR-0718KL R2,10k | R_0603 | R2, R4 |
| 1 | RC0603JR-073K6L R1,54.9k | R_0603 | R3 |
Vbus converter mezzanine design files
The KiCad project lives in the o16s/oibus-mosfet-driver-module repository on GitHub; these links point at the commit this page was built from.
Vbus converter mezzanine: common questions
How big is the Vbus converter mezzanine PCB?
The Vbus converter mezzanine measures 10.9 × 29.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vbus converter mezzanine?
17 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Vbus converter mezzanine design files?
From the o16s/oibus-mosfet-driver-module repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Vbus converter mezzanine design in my own project?
The repository has no license, so all rights stay with o16s. Use it as a reference, and ask the author before reusing the design.
