IoT4Ag LoRaWAN Buffer
oats-center·iot4ag-lorawan-adc-buffer·hardware/lorawan-adc-sensor-node/UPenn_OpAmp.kicad_pcb
About the IoT4Ag LoRaWAN Buffer PCB
IoT4Ag LoRaWAN Buffer is an open source PCB design by oats-center, published on GitHub under the MIT license. It is a 2-layer board measuring 106 × 147.1 mm, with 63 components from 21 distinct parts.
Other key parts include the C521307, C403864, C61006 and ALD1116SAL. By type, the board carries 20 capacitors, 13 connectors, 10 diodes, 8 ICs, 6 resistors and 2 switches.
From the project
ADC buffer for the Dragino LoRaWAN module
Main components on the IoT4Ag LoRaWAN Buffer
IoT4Ag LoRaWAN Buffer bill of materials (BOM)
63 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | C521307 AD8226 | SOIC-8_3.9x4.9mm_P1.27mm | U1, U4, U6 |
| 3 | C403864 AD8615 | TSOT-23-5_HandSoldering | U2, U5, U7 |
| 1 | C61006 ADP7142AUJZ-3.3 | TSOT-23-5 | U3 |
| 1 | ALD1116SAL DS18B20U | MSOP-8_3x3mm_P0.65mm | U8 |
| 1 | SCREW_TERMINAL_01X12 643416-1 | TE_643416-1 | J1 |
| 2 | Conn_02x03_Odd_Even | PinSocket_2x03_P2.54mm_Vertical | J2, J5 |
| 2 | CONN_01X13_PIN Conn_01x13_Pin | PinHeader_1x13_P2.54mm_Vertical | J3, J4 |
| 2 | 643416-1 | TE_643416-1 | J6, J7 |
| 6 | TestPoint | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | P1+, P1-, P2+, P2-, P3+, P3- |
| 1 | TestPoint | TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | 5V |
| 3 | C865614 68k | R_0805_2012Metric | RG0, RG1, RG2 |
| 1 | C976354 SW_DIP_x03 | SW_DIP_SPSTx03_Slide_Omron_A6S-310x_W8.9mm_P2.54mm | SW1 |
| 1 | C976354 LoRa Uplink | SW_Push_1P1T_NO_E-Switch_TL3301NxxxxxG | SW2 |
| 10 | C85200 ESD9B3.3ST5G | D_SOD-323 | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 3 | C520009 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C15, C20 |
| 7 | C111662 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C8, C11, C13, C16, C18 |
| 7 | C76633 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C7, C9, C12, C14, C17, C19 |
| 2 | C146681 2.2u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 1 | C1848754 330u | CP_Elec_10x10 | C10 |
| 3 | C180849 10k | R_0805_2012Metric | R1, R3, R5 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | C176204 10 | R_0805_2012Metric | R2, R4, R6 |
IoT4Ag LoRaWAN Buffer design files
The KiCad project lives in the oats-center/iot4ag-lorawan-adc-buffer repository on GitHub; these links point at the commit this page was built from.
IoT4Ag LoRaWAN Buffer: common questions
How big is the IoT4Ag LoRaWAN Buffer PCB?
The IoT4Ag LoRaWAN Buffer measures 106 × 147.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IoT4Ag LoRaWAN Buffer?
63 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IoT4Ag LoRaWAN Buffer design files?
From the oats-center/iot4ag-lorawan-adc-buffer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IoT4Ag LoRaWAN Buffer design in my own project?
Yes, under the terms of its MIT license, which oats-center chose for the repository.