Pulsed Current Battery Load
oats-center·iot4ag-lorawan-adc-buffer·hardware/pulsed_current_load/pulsed_current_test_circuit.kicad_pcb
About the Pulsed Current Battery Load PCB
Pulsed Current Battery Load is an open source PCB design by oats-center, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 50 mm, with 17 components from 9 distinct parts.
Other key parts include the C521307, C403864 and C61006. By type, the board carries 6 resistors, 3 ICs, 3 diodes and 2 connectors.
It belongs with the power & battery designs in this gallery.
From the project
ADC buffer for the Dragino LoRaWAN module
Main components on the Pulsed Current Battery Load
Pulsed Current Battery Load bill of materials (BOM)
17 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C521307 eALD1116SAL | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | C403864 eALD1116SAL | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | C61006 eALD1116SAL | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | SCREW_TERMINAL_01X12 Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical_SMD | J1 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical_SMD | J2 |
| 3 | C157402 LM234DT | SOIC-8_3.9x4.9mm_P1.27mm | CR1, CR2, CR3 |
| 3 | C85200 1N4148 | D_SOD-123 | D1, D2, D3 |
| 3 | C180849 4120 | R_0603_1608Metric | R1, R3, R5 |
| 3 | C176204 41200 | R_0603_1608Metric | R2, R4, R6 |
Pulsed Current Battery Load design files
The KiCad project lives in the oats-center/iot4ag-lorawan-adc-buffer repository on GitHub; these links point at the commit this page was built from.
Pulsed Current Battery Load: common questions
How big is the Pulsed Current Battery Load PCB?
The Pulsed Current Battery Load measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pulsed Current Battery Load?
17 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pulsed Current Battery Load design files?
From the oats-center/iot4ag-lorawan-adc-buffer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pulsed Current Battery Load design in my own project?
Yes, under the terms of its MIT license, which oats-center chose for the repository.
More boards in iot4ag-lorawan-adc-buffer
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k