Nebulizer20x10
About the Nebulizer20x10 PCB
Nebulizer20x10 is an open source AVR/Arduino PCB design by OfficeChromatography, published on GitHub. It is a 2-layer board measuring 99.1 × 62 mm, with 32 components from 23 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the SC39-11SRWA, MCP1407-E/P and L7805. By type, the board carries 8 resistors, 6 capacitors, 5 ICs, 4 connectors, 2 transistors and 2 switches.
From the project
Stand-alone device for derivatizations and bioassays in planar chromatography
This repository contains the folders for the 3D parts, the electronics, and the firmware for the 20 cm x 10 cm nebulizer.
For details and instructions consult the given reference.
Main components on the Nebulizer20x10
Nebulizer20x10 bill of materials (BOM)
32 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | SC39-11SRWA | Sx39-1xxxxx | U1, U2, U3 |
| 1 | MCP1407-E/P MCP1407-E_P | DIP254P762X432-8 | U4 |
| 1 | L7805 | TO-220-3_Vertical | U5 |
| 1 | Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 1 | IRFI640 | TO-220-3_Vertical | Q1 |
| 1 | IRFR3410 | TO-252-2 | Q2 |
| 3 | Conn_01x02_Pin | PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J1, J2, J3 |
| 1 | Barrel_Jack_Switch | BarrelJack_GCT_DCJ200-10-A_Horizontal | J4 |
| 1 | 4k7 | Potentiometer_Piher_PT-10-V10_Vertical | RV1 |
| 2 | SW_Push | SW_PUSH_6mm_H5mm | SW1, SW2 |
| 1 | P6KE 220A | D_5W_P12.70mm_Horizontal | D1 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 100u | L_Radial_D10.0mm_P5.00mm_Neosid_SD12_style3 | L1 |
| 1 | 220n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1 |
| 1 | 1n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C2 |
| 2 | 470u | CP_Radial_D8.0mm_P3.50mm | C3, C6 |
| 1 | 100n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C4 |
| 1 | 10u | CP_Radial_D4.0mm_P2.00mm | C5 |
| 4 | 180R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R6 |
| 1 | 10r | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0r1 | R_Axial_DIN0614_L14.3mm_D5.7mm_P20.32mm_Horizontal | R5 |
| 1 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
Nebulizer20x10 design files
The KiCad project lives in the OfficeChromatography/Nebulizer20x10 repository on GitHub; these links point at the commit this page was built from.
Nebulizer20x10: common questions
What microcontroller does the Nebulizer20x10 use?
The Nebulizer20x10 is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the Nebulizer20x10 PCB?
The Nebulizer20x10 measures 99.1 × 62 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nebulizer20x10?
32 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nebulizer20x10 design files?
From the OfficeChromatography/Nebulizer20x10 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nebulizer20x10 design in my own project?
The repository has no license, so all rights stay with OfficeChromatography. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Nebulizer20x10 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k