Isolated relay module
Oguzkaganoz·isolated-relay-module
About the Isolated relay module
Isolated relay module is an open source PCB design by Oguzkaganoz, published on GitHub. It is a 2-layer board measuring 62 × 46.5 mm, with 9 components from 8 distinct parts.
Other key parts include the PC817. By type, the board carries 3 connectors, 2 resistors, 1 IC, 1 transistor, 1 relay and 1 diode.
From the project
PC817 isolated, 12V coil, high-current-protected relay board design
This project is a compact and reliable relay module designed to control high-voltage loads using a microcontroller (e.g., Arduino, ESP32). It features optical isolation to ensure the safety of your controller by separating the low-voltage control logic from high-voltage circuits.
Main components on the Isolated relay module
Isolated relay module bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PC817 | DIP-4_W7.62mm | U1 |
| 1 | BC547 | TO-92_Inline | Q1 |
| 2 | Conn_01x03 | TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J1, J3 |
| 1 | Conn_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | SANYOU_SRD_Form_C | Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | 1N4007 | D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 1 | 1000 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
Isolated relay module design files
The KiCad project lives in the Oguzkaganoz/isolated-relay-module repository on GitHub; these links point at the commit this page was built from.
- Layoutgucmodulu.kicad_pcb
- Schematicgucmodulu.kicad_sch
Isolated relay module: common questions
How big is the Isolated relay module?
The Isolated relay module measures 62 × 46.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Isolated relay module?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Isolated relay module design files?
From the Oguzkaganoz/isolated-relay-module repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Isolated relay module design in my own project?
The repository has no license, so all rights stay with Oguzkaganoz. Use it as a reference, and ask the author before reusing the design.