Thunder Plains Badge 2024

OklahomaOpenSourceHardware·OKC-OSH-2024-Badge·ThunderPlains Badge/Thunder Plains Badge 2024/Thunder Plains Badge 2024.kicad_pcb

Thunder Plains Badge 2024 PCB layout, top view — open source AVR/Arduino board by OklahomaOpenSourceHardware

About the Thunder Plains Badge 2024 PCB

Thunder Plains Badge 2024 is an open source AVR/Arduino PCB design by OklahomaOpenSourceHardware, published on GitHub. It is a 2-layer board measuring 88.4 × 62.5 mm, with 48 components from 9 distinct parts.

Its main chip is the ATtiny816-M, from the AVR/Arduino family. By type, the board carries 37 diodes, 9 resistors, 1 IC and 1 connector.

It belongs with the wearables designs in this gallery.

From the project

2024 badge for Oklahoma PCB Tech Conferences

Main components on the Thunder Plains Badge 2024

ATtiny816-M

Thunder Plains Badge 2024 bill of materials (BOM)

48 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATtiny816-M
U1
1
Conn_02x03_Counter_Clockwise
J3
2
C3647024
LED
D1, D2
31
LED
D3, D4, D5, D6, D7, D8, D9, D10 +23
2
WS2812B
D35, D36
2
C3647024
WS2812B
D37, D38
5
220
R1, R6, R7, R8, R9
2
C138021
220
R2, R4
2
C105872
220
R3, R5

Thunder Plains Badge 2024 design files

The KiCad project lives in the OklahomaOpenSourceHardware/OKC-OSH-2024-Badge repository on GitHub; these links point at the commit this page was built from.

Thunder Plains Badge 2024: common questions

What microcontroller does the Thunder Plains Badge 2024 use?

The Thunder Plains Badge 2024 is built around the ATtiny816-M, from the AVR/Arduino family.

How big is the Thunder Plains Badge 2024 PCB?

The Thunder Plains Badge 2024 measures 88.4 × 62.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Thunder Plains Badge 2024?

48 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Thunder Plains Badge 2024 design files?

From the OklahomaOpenSourceHardware/OKC-OSH-2024-Badge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Thunder Plains Badge 2024 design in my own project?

The repository has no license, so all rights stay with OklahomaOpenSourceHardware. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Thunder Plains Badge 2024 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in OKC-OSH-2024-Badge

Similar boards